Caterpillar Approved Attachments
Note: Do not use any unapproved attachments on this machine.
In addition to the forks, material handling arm and buckets that are included in this Operation and Maintenance Manual, Caterpillar also offers the following attachments:
- Asphalt cutter
- Auger
- Bale spear
- Blade
- Broom
- General purpose buckets
- High dump buckets
- Light material buckets
- Multipurpose buckets
- Rake
- Side dump bucket
If one is provided, refer to the Operation and Maintenance Manual of the attachment for the proper use of the attachment.
Contact your Caterpillar dealer concerning specific attachments that are approved by Caterpillar for this machine. This list was completed at the time of publication. There may be additional attachments that have been approved since that time. Consult your Caterpillar dealer for an updated list of approved attachments.
Caterpillar Information System:
5130, 5130B and 5230 Excavators, 784B, 785B, 785C, 789B, 789C, 793B and 793C Off-Highway Truck/Tractors and 992G, 994 and 994D Wheel Loaders Vital Information Management System (VIMS) TPS Service Operation
950G Wheel Loader, 962G Wheel Loader and IT62G Integrated Toolcarrier Hydraulic System Main Control Valve (Lift and Auxiliary)
725C2 Articulated Truck Leaving the Machine
IT14G Integrated Toolcarrier and 914G Wheel Loader Power Train Limited Slip Differential - Disassemble
D250E Series II and D300E Series II Articulated Trucks Lowering the Body with Engine Stopped
D250E Series II and D300E Series II Articulated Trucks Stopping the Engine if an Electrical Malfunction Occurs
Challenger 35, Challenger 45 and Challenger 55 Agricultural Tractors Refill Capacities
69D and 769D Off-Highway Truck and 771D Quarry Truck Power Train Rear Axle Housing and Differential - Remove
D250E Series II and D300E Series II Articulated Trucks Stopping the Engine
D250E Series II and D300E Series II Articulated Trucks Stopping the Machine
D350E Series II and D400E Series II Articulated Trucks Dumping
D250E Series II and D300E Series II Articulated Trucks Hauling
789C Off-Highway Truck Steering System Solenoid and Relief Valve (Steering)
69D and 769D Off-Highway Truck and 771D Quarry Truck Power Train Differential and Bevel Gear - Assemble
69D and 769D Off-Highway Truck and 771D Quarry Truck Power Train Differential and Bevel Gear - Disassemble
69D and 769D Off-Highway Truck and 771D Quarry Truck Power Train Transmission Planetary - Disassemble
69D and 769D Off-Highway Truck and 771D Quarry Truck Power Train Transmission Planetary - Assemble
789C Off-Highway Truck Steering System Metering Pump (Steering)
3406C Engines for Caterpillar Built Machines Exhaust Manifold Shield
789C Off-Highway Truck Steering System Pressure Switches
IT14G Integrated Toolcarrier and 914G Wheel Loader Power Train Limited Slip Differential - Assemble
784C and 785C Off-Highway Truck/Tractors Air System and Brakes Pressure Switch (Stop Light)
5130, 5130B and 5230 Excavators, 784B, 785B, 785C, 789B, 789C, 793B and 793C Off-Highway Truck/Tractors and 992G, 994 and 994D Wheel Loaders Vital Information Management System (VIMS) TPS Normal Operation
69D and 769D Off-Highway Truck and 771D Quarry Truck Power Train Speed Sensor (Transmission) - Remove