Inlet oil for operation of the hydraulic controls comes from the priority valve. Then, inlet oil goes through tube (2) and bottom manifold (8).
Oil flows from the pressure control valve, through plate (7) and the bottom manifold (8). The oil is then sent to the speed clutch and to the direction clutch. The oil passes through the respective opening (9), (10), (11), (12) or (13).
Illustration 1 | g00484492 |
Transmission hydraulic controls (top view) (1) Speed selection spool (2) Oil tube (inlet from pump) (3) Oil tube (outlet to transmission lube) (4) Direction selection spool |
Illustration 2 | g00485294 |
Transmission hydraulic controls (side view) (5) Top Plate (6) Selector and pressure control valve (7) Plate (8) Bottom manifold |
Illustration 3 | g00485298 |
Transmission hydraulic controls (bottom view) (9) Opening to No. 1 clutch (10) Opening to No. 2 clutch (11) Opening to No. 3 clutch (12) Opening to No. 4 clutch (13) Opening to No. 5 clutch |