Air Conditioner and Heater Fan Motor - Remove and Install
Removal Procedure
Start By:
- Remove the hood. Refer to Disassembly and Assembly, SENR6764, "Hood - Remove and Install".
- Remove four bolts (1) and the washers. Remove guard (2) .
Note: This procedure can be used for both air conditioner and heater fan motors.
Show/hide table
Illustration 1 | g00484900 |
- Loosen set screw (3) and remove fan assembly (4) .
Show/hide table
Illustration 2 | g00484901 |
- Disconnect wiring assembly (5). Remove two nuts (7), the bolts and the washers. Remove air conditioner and heater fan motor (8). Remove bracket (6) .
Show/hide table
Illustration 3 | g00484903 |
Installation Procedure
- Install air conditioner and heater fan motor (8) and install bracket (6). Install the two bolts, the washers and nuts (7) .
Show/hide table
Illustration 4 | g00484903 |
- Install fan assembly (4). Tighten set screw (3) .
Show/hide table
Illustration 5 | g00484901 |
- Install guard (2). Install the four washers and bolts (1) .
Show/hide table
Illustration 6 | g00484900 |
End By: Install the hood. Refer to Disassembly and AssemblySENR6764, "Hood - Remove and Install".
Caterpillar Information System:
IT14G Integrated Toolcarrier and 914G Wheel Loader Machine Systems Hydraulic Oil Cooler - Remove and Install
IT14G Integrated Toolcarrier and 914G Wheel Loader Machine Systems Secondary Steering Valve - Install
IT14G Integrated Toolcarrier and 914G Wheel Loader Machine Systems Secondary Steering Valve - Remove
IT14G Integrated Toolcarrier and 914G Wheel Loader Machine Systems Priority Valve - Install
D250E Series II, D300E Series II, D350E Series II and D400E Series II Articulated Trucks Power Train Electronic Control System CID 0722 FMI 05 Solenoid Valve (Secondary Brake) Current Below Normal - Test
IT62G Series II Integrated Toolcarrier Quick Coupler Operation
69D and 769D Off-Highway Trucks and 771D Quarry Truck Machine Systems Fuel Tank - Install
D250E Series II, D300E Series II, D350E Series II and D400E Series II Articulated Trucks Power Train Electronic Control System CID 0722 FMI 03 Solenoid Valve (Secondary Brake) Voltage Above Normal - Test
IT14G Integrated Toolcarrier and 914G Wheel Loader Machine Systems Priority Valve - Remove
D250E Series II, D300E Series II, D350E Series II and D400E Series II Articulated Trucks Power Train Electronic Control System CID 0715 FMI 04 Pressure Switch (Retarder Brake) Voltage Below Normal - Test
561M Pipelayer Transmission Hydraulic Control
IT14G Integrated Toolcarrier Attachment Auxiliary Control (Third Lever Function) - Fourth Valve Function
554 and 574 Forwarders Power Train Piston Motor (Power Train)
IT14G Integrated Toolcarrier and 914G Wheel Loader Machine Systems Bank Valve - Remove
784C and 785C Off-Highway Truck/Tractors Power Train Brake Oil Overheating Troubleshooting
24H Motor Grader Braking System Accumulator Charging Valve
5130, 5130B and 5230 Excavators, 784B, 785B, 785C, 789B, 789C, 793B and 793C Off-Highway Truck/Tractors and 992G, 994 and 994D Wheel Loaders Vital Information Management System (VIMS) Normal Operation
793C Off-Highway Truck Machine Systems Front Suspension (Cylinder) - Disassemble
24H Motor Grader Power Train Torque Converter Hydraulic System
5130, 5130B and 5230 Excavators, 784B, 785B, 785C, 789B, 789C, 793B and 793C Off-Highway Truck/Tractors and 992G, 994 and 994D Wheel Loaders Vital Information Management System (VIMS) Service Operations
5130, 5130B and 5230 Excavators, 784B, 785B, 785C, 789B, 789C, 793B and 793C Off-Highway Truck/Tractors and 992G, 994 and 994D Wheel Loaders Vital Information Management System (VIMS) Truck Payload - Calibrate
69D and 769D Off-Highway Trucks and 771D Quarry Truck Machine Systems Brake Valve (Parking and Secondary) - Disassemble
550 Wheel Harvester, 570 Wheel Harvester and 580 Wheel Harvester Power Train Piston Pump (Power Train)
Challenger 35, Challenger 45 and Challenger 55 Agricultural Tractors Power Train Pressure Tests