Pilot Control Valve - Install
Installation Procedure
- Install the pilot control valves. Install the washers and four nuts (8) .
Show/hide table
Illustration 1 | g00472231 |
- Install fifteen hose assemblies (6) .
Note: Check the condition of all seals and of all components. If any parts are worn or damaged, use new parts for replacement.
Show/hide table
Illustration 2 | g00472228 |
- Connect wiring harness (7) .
Show/hide table
Illustration 3 | g00472229 |
- Start the engine in order to purge air from the system. Check for leaks. Tighten the hoses if leaks are detected. Operate each of the implements in order to ensure accuracy of the installation. This will also allow you to remove any air from the system.
- Install the plastic cover and bolts (5) .
Show/hide table
Illustration 4 | g00472227 |
- Install bolts (4) into the top of the cover.
Show/hide table
Illustration 5 | g00472206 |
- Install handle (3). Install handles (2). Tighten locknuts (1) against the bases of handles (2) .
Caterpillar Information System:
65E, 75E, 85E and 95E Agricultural Tractors Drive Wheel Bolt Torque - Tighten
3304B and 3306B Engines for Caterpillar Built Machines Water Pump - Assemble
572R Pipelayer Hydraulic System Pipelayer Winches
69D and 769D Off-Highway Trucks and 771D Quarry Truck Air Compressor - Remove and Install
3304B and 3306B Engines for Caterpillar Built Machines Water Pump - Disassemble
69D and 769D Off-Highway Trucks and 771D Quarry Truck Refrigerant Condenser - Remove and Install
814F Wheel Tractor, 815F Soil Compactor and 816F Landfill Compactor Braking System Parking Brake Actuator
950G Wheel Loader, 962G Wheel Loader and IT62G Integrated Toolcarrier Hydraulic System Pilot Valve - Pilot Hydraulic System
69D and 769D Off-Highway Trucks and 771D Quarry Truck Refrigerant Compressor - Remove and Install
CP-563D, CS-563D, CS-573D and CS-583D Vibratory Compactors Vibratory System Variable Frequency Electrical Control - Test and Adjust - If Equipped
IT14G Integrated Toolcarrier Hydraulic System Oil - Change
IT14G Integrated Toolcarrier Fuel Tank Water and Sediment - Drain
IT62G Series II Integrated Toolcarrier Quick Coupler Lockout Control - If Equipped
3408E and 3412E Engines for Caterpillar Built Machines Bearing Clearance - Check
980G Wheel Loader Braking System Brake Control Valve (Parking)
3176C and 3196 Industrial Engines Belt Tensioner
69D and 769D Off-Highway Trucks and 771D Quarry Truck Fan - Remove and Install
950G Wheel Loader, 962G Wheel Loader and IT62G Integrated Toolcarrier Hydraulic System General Information - Integrated Toolcarriers
3176C and 3196 Engines for Caterpillar Built Machines Engine Oil Filter Base
Repair Procedure for Repairing a Radiator{1353} Repair Procedure for Repairing a Radiator{1353}
69D and 769D Off-Highway Trucks and 771D Quarry Truck Turbocharger - Remove
IT14G Integrated Toolcarrier Attachment Coupler Control
CP-563D, CS-563D, CS-573D and CS-583D Vibratory Compactors Auxiliary Hydraulic System Fan Motor (Radiator Cooling)
IT14G Integrated Toolcarrier and 914G Wheel Loader Machine Systems Pilot Control Valve - Disassemble