784C and 785C Off-Highway Truck/Tractors Caterpillar


Ether Starting Aid Cylinder - Replace

Usage:

785C 1HW

------ PERINGATAN! ------

Menghirup uap ether atau terkena ether berkali-kali pada kulit dapat menyebabkan cedera. Cedera dapat terjadi akibat kelalaian dalam mematuhi prosedur berikut:

Gunakan ether hanya di daerah yang berventilasi baik.

Jangan merokok saat mengganti silinder ether.

Gunakan ether dengan hati-hati untuk menghindari terjadinya kebakaran.

Jangan menyimpan silinder ether pengganti dalam daerah yang berpenghuni atau di dalam kompartemen operator.

Jangan menyimpan silinder ether pada tempat yang terkena sinar matahari langsung atau pada temperatur di atas 49°C (120°F).

Buang silinder di tempat yang aman. Jangan melubangi atau membakar silinder.

Jaga agar ether tidak dapat dijangkau oleh orang-orang yang tidak berkepentingan.

Untuk menghindari kemungkinan terjadinya cedera, pastikan bahwa rem sedang diterapkan dan semua alat kontrol berada dalam posisi hold atau Netral sewaktu menghidupkan engine.




Ilustrasi 1g00430338
Lokasi silinder alat bantu start ether


    Ilustrasi 2g00404779
    (1) Klem
    (2) Silinder alat bantu start ether

  1. Kendorkan klem (1) dan lepaskan silinder alat bantu start ether (2).

  2. Lepaskan gasket bekas. Pasang gasket yang baru yang disediakan bersama-sama dengan silinder alat bantu start ether yang baru (2). Pasang silinder alat bantu start ether yang baru (2). Kencangkan klem (1).

Caterpillar Information System:

DASA 280 Measuring and Control System Programming Times
793C Off-Highway Truck Machine Systems Brake Light Pressure Switch - Remove and Install
3003, 3013, 3014 and 3024 Engines for Caterpillar Built Machines Fuel Injection Pump
784C and 785C Off-Highway Truck/Tractors Steering System Oil Filter - Replace
793C Off-Highway Truck Machine Systems Hoist and Brake Hydraulic Breather - Remove and Install
IT14G Integrated Toolcarrier and 914G Wheel Loader Machine Systems Coupler Cylinder - Remove
572R Pipelayer Boom Line - Install
DASA 280 Measuring and Control System Setting Module
3003, 3013, 3014 and 3024 Engines for Caterpillar Built Machines Fuel Injection Nozzles
3176C and 3196 Engines for Caterpillar Built Machines Rear Power Take-Off (RPTO)
572R Pipelayer Hook Load Line - Install
DASA 280 Measuring and Control System Programming Variables
3126E and 3126B Commercial and Truck Engines Fuel System - Prime
793C Off-Highway Truck Machine Systems Relay Valve (Brake) - Assemble
631E Series II Wheel Tractor-Scrapers Radiator Core - Clean
CP-563D, CS-563D and CS-583D Vibratory Compactors Leveling Blade General Information
IT14G Integrated Toolcarrier and 914G Wheel Loader Machine Systems Coupler Cylinder - Install
3003, 3013, 3014 and 3024 Engines for Caterpillar Built Machines Fuel Transfer Pump
65E, 75E, 85E and 95E Agricultural Tractors Coolant Recommendations
3003, 3013, 3014 and 3024 Engines for Caterpillar Built Machines Gear Group (Front)
65E, 75E, 85E and 95E Agricultural Tractors Extended Life Coolant (ELC)
3406E Truck Engine Fuel Filter Base
924Gz Wheel Loader Engine Starting
65E, 75E, 85E and 95E Agricultural Tractors Extended Life Coolant (ELC) Cooling System Maintenance
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.