Swing Lock Pin Control
Show/hide table
Illustration 1 | g00107021 |
Remove the swing lock pin (1) when you operate the backhoe or when the swing lock pin is not required. Place the swing lock pin in the storage bracket (2) on the back of the machine.
Show/hide table
Illustration 2 | g00107020 |
Install the swing lock pin in order to ensure that the backhoe will not move and swing into objects or into traffic. Always install the swing lock pin when you are roading the machine, using the loader bucket, or transporting the machine.
Caterpillar Information System:
446B Backhoe Loader Swing Frame and Cylinder Bearings - Lubricate
446B Backhoe Loader Transmission Magnetic Screen - Clean
446B Backhoe Loader Stopping the Machine
446B Backhoe Loader Stopping the Engine
446B Backhoe Loader Stopping the Engine if an Electrical Malfunction Occurs
120H, 12H, 135H, 140H, 143H, 160H and 163H Motor Graders Air System and Brakes Service Brakes
446B Backhoe Loader Steering Control
416C, 426C, 428C, 436C and 438C Backhoe Loaders Engine Starting with Jump Start Cables
446B Backhoe Loader Starting Below 0°C (32°F) with Ether Starting Aid
446B Backhoe Loader Starting Above 0°C (32°F)
446B Backhoe Loader Stabilizer and Cylinder Bearings - Lubricate
446B Backhoe Loader Sound Information and Vibration Information
446B Backhoe Loader Tire Inflation - Check
416C, 426C, 428C, 436C and 438C Backhoe Loaders Tire Inflation with Air
143H and 163H Motor Graders Air System and Brakes Front Wiring
446B Backhoe Loader Tire Shipping Pressure
446B Backhoe Loader Towing the Machine
446B Backhoe Loader Transmission Direction and Speed Control
446B Backhoe Loader Transmission Neutral Lock Control
446B Backhoe Loader Transmission Oil - Change
446B Backhoe Loader Transmission Oil Filter - Replace
446B Backhoe Loader Transmission Oil Level - Check
446B Backhoe Loader Transport Position
446B Backhoe Loader Travel Speed