446B Backhoe Loader Caterpillar


Stopping the Engine

Usage:

446B 5BL


NOTICE

Stopping the engine immediately after it has been working under load, can result in overheating and accelerated wear of the engine components.

Refer to the following procedure, to allow the engine to cool, and to prevent excessive temperatures in the turbocharger housing (if equipped), which could cause oil coking problems.


  1. Operate the engine for five minutes at low idle with no load.

    This allows hot areas in the engine to cool gradually. This will extend the engine life.




    Illustration 1g00105114

  1. Turn the engine start switch key to the OFF position in order to stop the engine.

  1. Move all hydraulic control levers back and forth in order to relieve hydraulic pressure.

  1. Move all hydraulic control levers into the HOLD position.
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.