Stopping the Engine if an Electrical Malfunction Occurs
Turn the engine start switch key to OFF. If the engine does not stop, perform the following procedure.
- Open the engine access door that is located on the left side of the machine.
Show/hide table
Illustration 1 | g00105081 |
- Push the end of the fuel shutoff valve inward in order to stop the engine.
Show/hide table
Illustration 2 | g00107013 |
Note: Do not operate the machine again until the malfunction has been corrected.
Caterpillar Information System:
120H, 12H, 135H, 140H, 143H, 160H and 163H Motor Graders Air System and Brakes Service Brakes
446B Backhoe Loader Steering Control
416C, 426C, 428C, 436C and 438C Backhoe Loaders Engine Starting with Jump Start Cables
446B Backhoe Loader Starting Below 0°C (32°F) with Ether Starting Aid
446B Backhoe Loader Starting Above 0°C (32°F)
446B Backhoe Loader Stabilizer and Cylinder Bearings - Lubricate
446B Backhoe Loader Sound Information and Vibration Information
446B Backhoe Loader Service Brake Control
446B Backhoe Loader Seat
143H and 163H Motor Graders Air System and Brakes Air Compressor
446B Backhoe Loader Sampling Interval and Location of Sampling Valve
446B Backhoe Loader Rotating Beacon Light
446B Backhoe Loader Stopping the Engine
446B Backhoe Loader Stopping the Machine
446B Backhoe Loader Transmission Magnetic Screen - Clean
446B Backhoe Loader Swing Frame and Cylinder Bearings - Lubricate
446B Backhoe Loader Swing Lock Pin Control
446B Backhoe Loader Tire Inflation - Check
416C, 426C, 428C, 436C and 438C Backhoe Loaders Tire Inflation with Air
143H and 163H Motor Graders Air System and Brakes Front Wiring
446B Backhoe Loader Tire Shipping Pressure
446B Backhoe Loader Towing the Machine
446B Backhoe Loader Transmission Direction and Speed Control
446B Backhoe Loader Transmission Neutral Lock Control