Starting Above 0°C (32°F)
Read Operation and Maintenance Manual, "Before Starting Engine" before you proceed.
Show/hide table
 | |
| Illustration 1 | g00105114 |
- Turn the engine start switch key to the START position.
- Release the engine start switch key after the engine starts.
- Allow the engine to warm up at LOW IDLE for five minutes.
Show/hide table
| NOTICE |
|---|
After every 20 seconds of engine cranking, allow two minutes for the starting motor to cool before cranking again. |
Caterpillar Information System:
446B Backhoe Loader Stabilizer and Cylinder Bearings - Lubricate
446B Backhoe Loader Sound Information and Vibration Information
446B Backhoe Loader Service Brake Control
446B Backhoe Loader Seat
143H and 163H Motor Graders Air System and Brakes Air Compressor
446B Backhoe Loader Sampling Interval and Location of Sampling Valve
446B Backhoe Loader Rotating Beacon Light
446B Backhoe Loader Refill Capacities
446B Backhoe Loader Radiator Core - Clean
446B Backhoe Loader Product Identification Number and Serial Number Locations
446B Backhoe Loader Parking Brake
446B Backhoe Loader Parking Brake Control
446B Backhoe Loader Starting Below 0°C (32°F) with Ether Starting Aid
416C, 426C, 428C, 436C and 438C Backhoe Loaders Engine Starting with Jump Start Cables
446B Backhoe Loader Steering Control
120H, 12H, 135H, 140H, 143H, 160H and 163H Motor Graders Air System and Brakes Service Brakes
446B Backhoe Loader Stopping the Engine if an Electrical Malfunction Occurs
446B Backhoe Loader Stopping the Engine
446B Backhoe Loader Stopping the Machine
446B Backhoe Loader Transmission Magnetic Screen - Clean
446B Backhoe Loader Swing Frame and Cylinder Bearings - Lubricate
446B Backhoe Loader Swing Lock Pin Control
446B Backhoe Loader Tire Inflation - Check
416C, 426C, 428C, 436C and 438C Backhoe Loaders Tire Inflation with Air