Swing Frame and Cylinder Bearings - Lubricate
Show/hide table
Illustration 1 | g00107017 |
Apply lubricant to the grease fitting for the top swing pin (1) .
Apply lubricant to the grease fitting for the bottom swing pin (2) .
Apply lubricant to the grease fitting for the eye of the swing cylinder (3). Repeat for the other swing cylinder.
Apply lubricant to the grease fitting for the bearing on the top of the swing cylinder (4). Repeat for the other swing cylinder.
Apply lubricant to the grease fitting for the bearing on the bottom of the swing cylinder (5). Repeat for the other swing cylinder.
There is a total of eight grease fittings.
Caterpillar Information System:
446B Backhoe Loader Transmission Magnetic Screen - Clean
446B Backhoe Loader Stopping the Machine
446B Backhoe Loader Stopping the Engine
446B Backhoe Loader Stopping the Engine if an Electrical Malfunction Occurs
120H, 12H, 135H, 140H, 143H, 160H and 163H Motor Graders Air System and Brakes Service Brakes
446B Backhoe Loader Steering Control
416C, 426C, 428C, 436C and 438C Backhoe Loaders Engine Starting with Jump Start Cables
446B Backhoe Loader Starting Below 0°C (32°F) with Ether Starting Aid
446B Backhoe Loader Starting Above 0°C (32°F)
446B Backhoe Loader Stabilizer and Cylinder Bearings - Lubricate
446B Backhoe Loader Sound Information and Vibration Information
446B Backhoe Loader Service Brake Control
446B Backhoe Loader Swing Lock Pin Control
446B Backhoe Loader Tire Inflation - Check
416C, 426C, 428C, 436C and 438C Backhoe Loaders Tire Inflation with Air
143H and 163H Motor Graders Air System and Brakes Front Wiring
446B Backhoe Loader Tire Shipping Pressure
446B Backhoe Loader Towing the Machine
446B Backhoe Loader Transmission Direction and Speed Control
446B Backhoe Loader Transmission Neutral Lock Control
446B Backhoe Loader Transmission Oil - Change
446B Backhoe Loader Transmission Oil Filter - Replace
446B Backhoe Loader Transmission Oil Level - Check
446B Backhoe Loader Transport Position