STANDARD NUT WILL NOT HOLD THE RECOMMENDED TORQUE FOR TRENCHER TEETH
Usage:
CONFIDENTIAL TIBU3922-00
Show/hide table
TECHNICAL INFORMATION BULLETIN |
AUGUST 6, 2003 |
WORK TOOL SKID STEER LOADER |
T9 (ABC1-UP), T15 (ABL1-UP) TRENCHERS 216 (4NZ1-UP), 226 (5FZ1-UP), 228 (6BZ1-UP), 236 (4YZ1-UP), 246 (5SZ1-UP), 248 (6LZ1-UP), 232 (CAB1-UP), 252 (FDG1-UP), 262 (CED1-UP), 242 (CMB1-UP) SKID STEER LOADERS |
Component Code(s) 6710, 671C-TTH, 7000 |
SUBJECT: STANDARD NUT WILL NOT HOLD RECOMMENDED TORQUE FOR TRENCHER TEETH
PROBLEM:
The standard 8T-4244 Nut (M12x1.75), which is used to attach the teeth on all T9 and T15 trencher tooth groups, will not hold the recommended torque for this application.
SOLUTION:
Replace the standard 8T-4244 Nuts (M12x1.75) with 6V-7687 Locknuts (M12x1.75). The recommended torque for the 6V-7687 Locknuts (M12x1.75) is 100 ? 20 N?m (74 ? 14 lb.ft.).
COPYRIGHT 2003 CATERPILLAR
ALL RIGHTS RESERVED