1999/11/01 Caterpillar


New Bearing Improves Differential Shafts Reliability {4066}

Usage:


PS300B (4PN) Pneumatic Roller Vibratory Compactors

Description of Change: The new bearing is now made of a harder material and a new radius has been introduced.

Adaptable To: The new 183-5196 Bearing (1) is going to replace the 145-4583 Bearing. This bearing is effective for the PS300B (4PN288) and can be retrofitted to the earlier PS300B (4PN1-287).

NOTE: Any time a differential shaft failure occurs, both of the existing bearings must be replaced by the new 183-5196 Bearing.

Caterpillar Information System:

1999/11/01 Correction To Disassembly And Assembly Module, RENR3402 {7258,7258}
1999/11/01 Correction To Disassembly And Assembly, Module, SENR9145 {7258,7258}
1999/11/01 Schematic Available For 793C Off-Highway Trucks {7601,7566}
1999/11/01 Improved Air Conditioning Hose Routing Increase Hose Service Life {1808}
1999/11/01 Battery Care And Maintenance {1401}
1999/11/01 Master Battery Disconnect Switch Is Available {1400}
1999/11/01 Battery Drain Can Cause Hard Starting {1400}
1999/10/25 New Flywheel Housing Gasket For 3408 And 3412 Machine Engines {1152}
1999/10/25 New Hydraulic Accumulator Assembly Procedure Increases Service Life {5077}
1999/10/25 Brake Life Severely Reduced When Performing Production Compaction Cycles In Travel (Third) Speed {4251}
1999/10/25 New Mounting For Engine Enclosure Doors Improves Service Life {7263}
1999/10/25 Improved Engine Enclosure Now Available {7263}
1999/11/01 Special Instruction, REHS0434-02, Is Available {0374,6800}
1999/11/01 Customer Site License And Annual Subscriptions For VIMSpc99 Software Available {7601}
1999/11/01 Improved Hydraulic Line For Pilot Control Increases Service Life {5057}
1999/11/01 Corrections To Operation And Maintenance Manual, SEBU7207 And SEBU7255 {1000,1463,1700}
1999/11/01 Additional Cable Straps Used On Control Switch Wiring {2359}
1999/11/01 New Screw Used For Pendulum Arm Covers {7228}
1999/11/01 Kits Available To Improve Lift Cylinder Operations {5102,5057}
1999/11/01 Control Valve Improves Tilt Cylinder Operation {5104,5132}
1999/11/01 New Process For Installing The Rear Transmission On The Chassis {4050}
1999/11/01 Improved Corrosion Protection For Reman Major Components {3100,3150,4059}
1999/11/01 New Hose Used On Harvester Head Stump Treatment {5057}
1999/11/01 New Hose Assembly Reduces Load On Lubrication Pump {5057}
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.