1999/09/27 Caterpillar


Flash Software Now Available {7620}

Usage:


572R (AAC, 2HZ) Pipelayers

Description of Change: Flash software is now available for the drivetrain controller on the pipelayer model listed above. The feature enhancements of this new software are described below:

* The deadband has been increased for the steering sensors in the pedal/lever steering arrangement. In the previous version of software, if the steering levers were pushed forward into the rubber stops, the resulting change in lever calibration had the potential to partially release the steering clutch when the lever was returned to the normal released position. Increasing the steering sensor deadband in this software corrects that problem.
* This software increases the brake torque at the pedal detent to improve machine steering performance under loaded conditions.
* This software supports the Pedal/FTC steering attachment.
* This software no longer allows flash programming if the parking brake is released.

Adaptable To: The new 175-1369 Software Group is a direct replacement for the existing software package. The new software group is effective with the 572R (2HZ369) Pipelayer. The new software is adaptable to 572R (2HZ1-368, AAC1-Up) Pipelayers.

Caterpillar Information System:

1999/09/27 Frame Reinforcement Increases Life In Heavy Duty Applications {7051}
1999/09/20 Service Parts Now Available For Transmission Gear Group (High Speed) - (8I-4190) {3053,3061}
1999/09/20 New Bolt Used To Attach Refrigerant Hoses To Compressor {1802,1808}
1999/09/20 VIMSpc99 Now Available {7601}
1999/09/20 VIMS-PC Version 2.4.3 MST Upgrade Now Available {7601,7620}
1999/09/20 Front Suspension Strut Plate Will Maintain Correct Position Of Retainers {7201}
1999/09/20 Procedure to Install Rear Axle on Certain Off-Highway Trucks Has Been Changed {3278,4208}
1999/09/20 Reduced Effort All Wheel Steer Brake Pedal Available {4265,4269}
1999/09/20 Special Instruction For Rebuilding The Backhoe Loader Pin Bores Is Now Available {6101,6104,6119,6501,6502,6503,6506,6508,6515,6518,6533,7054,7222}
1999/09/20 Spacers Ease Manual Greasing Of Auto Lubrication Machines {7540}
1999/09/20 Effectivity Of Product Support Literature For Caterpillar Monitoring System {0374,7490}
1999/09/20 Belt Disposal {4150,4198}
1999/09/27 New Fuel Level Sender Provides Increased Service Life {7481}
1999/09/27 Improved (Thermal Resetting) Fuse Now Included In The Longitudinal Stability Indicator Control Box - (If Equipped) {1417,7856}
1999/09/27 5 Micron Hydraulic System Filter Is Available For Telehandlers {5068,7525}
1999/09/27 New Service Information Available For Forest Products {0374,0375}
1999/09/27 Piston And Bladder Type Accumulators: Service Interval And Service Replacements {5077}
1999/10/04 New Blade Tip Cylinder Bracket Increases Wear Strip Life {5254,6174}
1999/10/04 New Shims To Improve Cab Mounting Now Available {7266}
1999/10/04 Improved Dust Seal For Hydraulic Cylinders Increases Service Life {5456,5457,5458,7562}
1999/10/04 New Cylinders Use Piston To Stop Instead Of Piston Bolt {5106,5223,5458,5468,5457,5486}
1999/10/04 A Special Instruction For Installing Restraints On Backhoe Loaders For Road Travel Is now Available {7000,7505}
1999/10/04 Changes To Oil Viscosity Recommendations For Off-Highway Truck Transmissions {0374,3150}
1999/10/04 New Bearing Assembly For The Final Drive Reduction Planetary Is Now Available {4050}
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.