Updated Assembly Procedure For 777D Off-Highway Trucks Is Available{7960,7006}
Usage:
776D (5ER) Tractor, 777D (3PR) 777D (2YW) High Altitude Arrangement Off-Highway Trucks
The SEHS9997-02 Special Instruction contains the necessary procedures and information for the assembly and commissioning procedures for the 776D (5ER) Tractor, 777D (3PR) and 777D (2YW) HAA Off-Highway Trucks.
SEHS9997-02 Special Instruction, "Assembly Procedure for 777D Off-Highway Trucks" is available through normal literature ordering channels.
Caterpillar Information System:
1998/09/14 New Clutches Reduce Drag And Improve Efficiency{3030,3155}
1998/09/07 New Serial Number Prefix {0374}
1998/09/07 The Cloud Point Specification In The Chart, "Specifications For Distillate Fuel," Has Changed In Certain Publications {1250,1280,0375}
1998/09/07 Addition Of Screed Deflectors {6643}
1998/09/07 Calibration Not Accepted During Auto Calibration Of Initial Propel Current {4800,7490}
1998/09/07 Asphalt Paver Track Adjuster Socket Now Available {4157}
1998/09/07 Inter-Axle Differential Joint Improved {3258,3287}
1998/09/07 Non-E-Trim Unit Injectors No Longer Produced For 3500B Engines {1290}
1998/09/07 Fuel Injection Pump Usage With Emissions Certified 3054 Engines In C-Series Backhoe Loaders {1251}
1998/09/07 New Implement Valve Detent Testing And Adjusting Specifications Provide Additional Flexibility In Adjustment {5057}
1998/08/31 Special Instruction, REHS0280, "Installation And Removal Of The Mechanically Attached Wear Plate System" Is Available {0374,6120,6820}
1998/08/31 Improved Method For Securing Sound Suppression Material In Engine Compartment {1801}
1998/09/14 Improved Laser Hardened Spindles Used In Certain Off-Highway Trucks{4205,4234}
1998/09/14 Use FT2563 Adjustment Tool For Assembly Of Limited-Slip Differential{3263}
1998/09/14 New 1U-8660 Hydraulic Unit Boring Bar, 9U-5730 Portable Boring Bar (110 Volt), And 9U-5889 Portable Boring Bar (220 Volt) Now Available{0679}
1998/09/14 New Torque Value For Lug Nut On Drive Wheels{4209,4210}
1998/09/21 Correction To Testing And Adjusting Manual, SENR6785-01 And Specifications Manual, SENR6703 {0374,3155}
1998/09/21 Recommended Lubrication And Torque Procedure For Cylinder Head Bolts {1100}
1998/09/21 Recommended Lubrication And Torque Procedure For Connecting Rod Bolts {1218}
1998/09/21 Recommended Lubrication And Torque Procedure For Main Bearing Cap Bolts {1203}
1998/09/21 New Plug Kit Improves Injection Actuation Pressure During Engine Cranking {1714}
1998/09/21 Use FT2594 Seal Installer For Correct Cone Seal Installation {7561}
1998/09/28 New Gear And New Shaft Assemblies Used In Scavenge Oil Pump Groups {1312}
1998/09/28 New Spacer Plate Gasket Provides Improved Sealing {1221}