Asphalt Paver Track Adjuster Socket Now Available {4157}
Usage:
AP-1055B (8BM),
BG-2455C (6TN) Asphalt Pavers
Description: 4C-9748 Socket available for adjustment of Mobile Trac System adjuster on AP-1055B/BG-2455C Asphalt Pavers.
1. Order two 4C-9748 Sockets.
2. Modify one 4C-9748 socket using the dimensions below, removing the rear ratchet drive portion of the socket does this modification.
3. Once removed, align the beveled edges and weld the two sockets together using a 8 mm weld.
NOTE: This socket is not intended for use as an impact socket.
Dimensions of 4C-9748 Socket
Modifications for One (1) 4C-9748 Socket
Completed Socket Adjuster
Caterpillar Information System:
1998/09/07 Inter-Axle Differential Joint Improved {3258,3287}
1998/09/07 Non-E-Trim Unit Injectors No Longer Produced For 3500B Engines {1290}
1998/09/07 Fuel Injection Pump Usage With Emissions Certified 3054 Engines In C-Series Backhoe Loaders {1251}
1998/09/07 New Implement Valve Detent Testing And Adjusting Specifications Provide Additional Flexibility In Adjustment {5057}
1998/08/31 Special Instruction, REHS0280, "Installation And Removal Of The Mechanically Attached Wear Plate System" Is Available {0374,6120,6820}
1998/08/31 Improved Method For Securing Sound Suppression Material In Engine Compartment {1801}
1998/08/31 Correct Vibratory Frequency Specifications {1408}
1998/08/31 Driveshaft Universal Joint Kits are Available {3251,3253}
1998/08/31 Circuit Breaker Replaced By A Fuse In Electronic Monitoring System (EMS) Power Circuit {1400}
1998/08/31 New Hose Assembly Routing For Hydraulic Oil Cooler Lines Group {1374,5057}
1998/08/31 Installation Of Clip Improves Throttle Pedal Sensor Service Life {1265,7553}
1998/08/31 Correction To Disassembly & Assembly Manual, SENR2608-01 {0374,3265}
1998/09/07 Calibration Not Accepted During Auto Calibration Of Initial Propel Current {4800,7490}
1998/09/07 Addition Of Screed Deflectors {6643}
1998/09/07 The Cloud Point Specification In The Chart, "Specifications For Distillate Fuel," Has Changed In Certain Publications {1250,1280,0375}
1998/09/07 New Serial Number Prefix {0374}
1998/09/14 New Clutches Reduce Drag And Improve Efficiency{3030,3155}
1998/09/14 Updated Assembly Procedure For 777D Off-Highway Trucks Is Available{7960,7006}
1998/09/14 Improved Laser Hardened Spindles Used In Certain Off-Highway Trucks{4205,4234}
1998/09/14 Use FT2563 Adjustment Tool For Assembly Of Limited-Slip Differential{3263}
1998/09/14 New 1U-8660 Hydraulic Unit Boring Bar, 9U-5730 Portable Boring Bar (110 Volt), And 9U-5889 Portable Boring Bar (220 Volt) Now Available{0679}
1998/09/14 New Torque Value For Lug Nut On Drive Wheels{4209,4210}
1998/09/21 Correction To Testing And Adjusting Manual, SENR6785-01 And Specifications Manual, SENR6703 {0374,3155}
1998/09/21 Recommended Lubrication And Torque Procedure For Cylinder Head Bolts {1100}