The Cloud Point Specification In The Chart, "Specifications For Distillate Fuel," Has Changed In Certain Publications {1250,1280,0375}
Usage:
All Caterpillar Machines
Reference: Special Publication; SEBU6250-08; Caterpillar Machine Fluids Recommendations; "Maintenance Section, Diesel Fuel Specifications"; Page 16. Operation and Maintenance Manual; SEBU5898-08; "Cold Weather Recommendations for Caterpillar Machines; Diesel Fuel Specifications"; Page 28.
In the chart that is shown on the listed page of the References, the statement listed in the Requirement column for the Cloud Point specification should be corrected. The statement should read, "This point should be below the lowest expected temperature.
Caterpillar Information System:
1998/09/07 Addition Of Screed Deflectors {6643}
1998/09/07 Calibration Not Accepted During Auto Calibration Of Initial Propel Current {4800,7490}
1998/09/07 Asphalt Paver Track Adjuster Socket Now Available {4157}
1998/09/07 Inter-Axle Differential Joint Improved {3258,3287}
1998/09/07 Non-E-Trim Unit Injectors No Longer Produced For 3500B Engines {1290}
1998/09/07 Fuel Injection Pump Usage With Emissions Certified 3054 Engines In C-Series Backhoe Loaders {1251}
1998/09/07 New Implement Valve Detent Testing And Adjusting Specifications Provide Additional Flexibility In Adjustment {5057}
1998/08/31 Special Instruction, REHS0280, "Installation And Removal Of The Mechanically Attached Wear Plate System" Is Available {0374,6120,6820}
1998/08/31 Improved Method For Securing Sound Suppression Material In Engine Compartment {1801}
1998/08/31 Correct Vibratory Frequency Specifications {1408}
1998/08/31 Driveshaft Universal Joint Kits are Available {3251,3253}
1998/08/31 Circuit Breaker Replaced By A Fuse In Electronic Monitoring System (EMS) Power Circuit {1400}
1998/09/07 New Serial Number Prefix {0374}
1998/09/14 New Clutches Reduce Drag And Improve Efficiency{3030,3155}
1998/09/14 Updated Assembly Procedure For 777D Off-Highway Trucks Is Available{7960,7006}
1998/09/14 Improved Laser Hardened Spindles Used In Certain Off-Highway Trucks{4205,4234}
1998/09/14 Use FT2563 Adjustment Tool For Assembly Of Limited-Slip Differential{3263}
1998/09/14 New 1U-8660 Hydraulic Unit Boring Bar, 9U-5730 Portable Boring Bar (110 Volt), And 9U-5889 Portable Boring Bar (220 Volt) Now Available{0679}
1998/09/14 New Torque Value For Lug Nut On Drive Wheels{4209,4210}
1998/09/21 Correction To Testing And Adjusting Manual, SENR6785-01 And Specifications Manual, SENR6703 {0374,3155}
1998/09/21 Recommended Lubrication And Torque Procedure For Cylinder Head Bolts {1100}
1998/09/21 Recommended Lubrication And Torque Procedure For Connecting Rod Bolts {1218}
1998/09/21 Recommended Lubrication And Torque Procedure For Main Bearing Cap Bolts {1203}
1998/09/21 New Plug Kit Improves Injection Actuation Pressure During Engine Cranking {1714}