Fuel Injection Pump Usage With Emissions Certified 3054 Engines In C-Series Backhoe Loaders {1251}
Usage:
416C (4ZN, 5YN, 1AR, 1KR, 1WR, 1XR),
426C (6XN, 7WN, 1CR, 1ER, 1FR, 1NR, 1MR, 1YR, 1ZR),
428C (8RN, 2CR),
436C (8TN, 9JN, 1PR, 2AR) Backhoe Loaders
Description of Change: The parts manuals for the machines listed in the chart show only the 148-7107 fuel injection pump for all of the arrangements. The parts books will be corrected.
Adaptable To: Refer to the following chart to determine the fuel injection pump usage with an emissions certified 3054 engine in a C-Series Backhoe Loader.
Caterpillar Information System:
1998/09/07 New Implement Valve Detent Testing And Adjusting Specifications Provide Additional Flexibility In Adjustment {5057}
1998/08/31 Special Instruction, REHS0280, "Installation And Removal Of The Mechanically Attached Wear Plate System" Is Available {0374,6120,6820}
1998/08/31 Improved Method For Securing Sound Suppression Material In Engine Compartment {1801}
1998/08/31 Correct Vibratory Frequency Specifications {1408}
1998/08/31 Driveshaft Universal Joint Kits are Available {3251,3253}
1998/08/31 Circuit Breaker Replaced By A Fuse In Electronic Monitoring System (EMS) Power Circuit {1400}
1998/08/31 New Hose Assembly Routing For Hydraulic Oil Cooler Lines Group {1374,5057}
1998/08/31 Installation Of Clip Improves Throttle Pedal Sensor Service Life {1265,7553}
1998/08/31 Correction To Disassembly & Assembly Manual, SENR2608-01 {0374,3265}
1998/08/31 Viewing Snapshots Of Low Steering Pressure With VIMS-PC May Cause Error Message To Display {7601}
1998/08/31 Correction To SENR1513, SENR1514, SENR8577, And SENR8578 Electrical Schematics {7490}
1998/08/31 Procedure On Removal Of Cradle Mounting Pin {3278,3268,7200}
1998/09/07 Non-E-Trim Unit Injectors No Longer Produced For 3500B Engines {1290}
1998/09/07 Inter-Axle Differential Joint Improved {3258,3287}
1998/09/07 Asphalt Paver Track Adjuster Socket Now Available {4157}
1998/09/07 Calibration Not Accepted During Auto Calibration Of Initial Propel Current {4800,7490}
1998/09/07 Addition Of Screed Deflectors {6643}
1998/09/07 The Cloud Point Specification In The Chart, "Specifications For Distillate Fuel," Has Changed In Certain Publications {1250,1280,0375}
1998/09/07 New Serial Number Prefix {0374}
1998/09/14 New Clutches Reduce Drag And Improve Efficiency{3030,3155}
1998/09/14 Updated Assembly Procedure For 777D Off-Highway Trucks Is Available{7960,7006}
1998/09/14 Improved Laser Hardened Spindles Used In Certain Off-Highway Trucks{4205,4234}
1998/09/14 Use FT2563 Adjustment Tool For Assembly Of Limited-Slip Differential{3263}
1998/09/14 New 1U-8660 Hydraulic Unit Boring Bar, 9U-5730 Portable Boring Bar (110 Volt), And 9U-5889 Portable Boring Bar (220 Volt) Now Available{0679}