Usage:
824G (4SN) Wheel Tractors, 825G (6RN) Soil Compactors, 826G (7LN) Landfill Compactors, 980G (9CM, 2KR, 2SR) Wheel Loaders
Reference: Service Manual Module, SENR5890-02, Systems Operation, Testing and Adjusting, 980G Wheel Loader, 824G Wheel Tractor, 825G Soil Compactor and 826G Landfill Compactor, Transmission Electronic Control System; Page 31, "CID 248 Procedure (CAT data link)". This module is found in Service Manual, SENR1325, 824G Wheel Tractor, 825G Soil Compactor, 826G Landfill Compactor and Service Manual, SENR5870, 980G Wheel Loader.
On Page 31, Step 3c is incorrect. Step 3c should be corrected to read as follows:
c. Check for continuity between contacts 3 and 9 of the machine harness connector for the transmission ECM.
On Page 31, Step 4b is incorrect. Step 4b should be corrected to read as follows:
b. Place a jumper between contacts 3 and 9 of the machine harness connector for the transmission ECM.