1998/02/16 Caterpillar


Special Instruction, SEHS9364-02, "Off-Highway Truck Rear Wheel Salvage", Is Now Available {0374,4208}

Usage:


773 (63G),
773B (63W),
773D (7ER),
777 (84A),
777B (4YC),
777C (4XJ),
777D (3PR),
785 (8GB),
785B (6HK),
789 (9ZC),
789B (7EK),
793 (3SJ),
793B (1HL) Off-Highway Trucks

Special Instruction, SEHS9364-02, "Off-Highway Truck Rear Wheel Salvage", is now available. This Special Instruction provides the necessary information for repairing the different rear wheel assemblies which may be on certain Off-Highway Trucks. The guideline is published to enable dealers to make successful repairs with the benefit of a cost reduction for customers.

This Special Instruction can be obtained through normal literature ordering channels, using the form number SEHS9364-02.

Caterpillar Information System:

1998/02/16 24H Motor Grader Windshield Wiper Now Serviced {7305}
1998/02/16 Chrome Tension Cylinder Rods Are More Durable And Improve Seal Life {4197}
1998/02/09 Replacement Available For 7M-7260 Liquid Gasket {0648,0649,0651}
1998/02/09 Proper Reading Of LCD Service Meters {7450,7478,7480}
1998/02/09 New Shaft Seals Available For Gear Type Hydraulic Pump Groups To Prevent Leakage {5073}
1998/02/09 Replacements Products Available For 4C-4079 Brake And Component Cleaner {0680}
1998/02/09 8N-4617 Air Cleaner Clamp Kit Available {1051}
1998/02/09 New Fan Drive Group (Variable Speed) Provides Increased Service Life {1359}
1998/02/09 Machines Equipped With Snow Tires Can Prevent Fender Damage {3013}
1998/02/09 VIMS Internal Back-Up Battery Life Expectancy And Replacement Procedure {7601}
1998/02/09 Longer Steering Hose Assembly Eliminates Rubbing {4304}
1998/02/09 Exhaust Bypass Group Changes Provide Improved Reliability, Performance, And Serviceability {1057}
1998/02/16 Procedure For Engine Pre-Lubrication System Bypass On Certain Off-Highway Trucks {1469}
1998/02/16 Improved Bearings Used In Transmission Planetary Groups On Certain Off-Highway Trucks {3160,3186}
1998/02/16 Cold Cylinder Cutout Strategy Added To The Electronic Control Module (ECM) Software {1902}
1998/02/16 Track Alignment Procedure {4198}
1998/02/16 Air Bleed Procedure For Track Tensioning Ram Equipped With The Field Update Kit {4197}
1998/02/16 Proper Remote Air Bleed Installation Procedure For Machines Equipped With MTS Track Systems {4197}
1998/02/16 Be Sure To Use The Correct Inlet And Exhaust Valves In Engines Equipped With Valve Bridges That Do Not Ride On Dowels {1105,1121}
1998/02/23 New Cover And Insert Reduce Wear Between Leveler And Cover For Steering Pump Group{4306}
1998/02/23 New Relief Valve Pressure Settings For Main Hydraulic System{5069,5117}
1998/02/23 New Custom Product Support Literature Is Available For 771D Quarry Trucks And 769D Off-Highway Trucks Equipped With 3Z-4939 Conventional Core Radiator Group{0374,1353}
1998/02/23 Procedure To Control Body Down Impact Speed On Certain Off-Highway Trucks{5102,7258}
1998/02/23 Oil Savers Removed From 793C Rear Axle Housing Will Improve Life Of Differential Group{4001,3260}
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.