1998/02/09 Caterpillar


Replacement Available For 7M-7260 Liquid Gasket {0648,0649,0651}

Usage:


SUPPLEMENT: MARCH 23, 1998

Service Magazine SEPD0403, Article 24, Page 38; "Replacement Available For 7M-7260 Liquid Gasket".

Disregard this article. See Service Magazine SEPD0409, Article 26, Page 18 with the same title.

--------------- END SUPPLEMENT ---------------

For many years Caterpillar has sold 7M-7260 Liquid Gasket ("Cat Red"). It can be used for sealing final drive flanges and many other areas. 7M-7260 Liquid Gasket contains 1,1,1-trichloroethane. As a result of the "Montreal Protocol", 1,1,1-trichloroethane (which was suspected of contributing to upper atmosphere ozone depletion) will no longer be manufactured. However, it is still legal to use the existing product in most countries, if the product is labeled properly.

Up to this time, Caterpillar has not found another solvent that has all of the desirable properties of 1,1,1-trichloroethane. Those desirable properties include:

* Non-flammable.
* Excellent solvent properties.
* Rapid evaporation.
* No residual oil film.
* Low toxicity.

Caterpillar continues to provide the non-flammable 7M-7260 Liquid Gasket for those jobs where such a product is necessary.

Unfortunately, the price of 1,1,1-trichloroethane is rapidly increasing and the supply is rapidly dwindling. It is now necessary to provide a less costly alternative product that can be used instead of 7M-7260 Liquid Gasket. This alternative product is now available as 138-3436 (8 ounce brush top can) or 9U-5839 (4 ounce collapsible tube) Liquid Gasket. Both of these new product contain the solvent acetone. ACETONE IS EXTREMELY FLAMMABLE. Acetone is a common solvent that is frequently found as the primary ingredient in lacquer thinner, carburetor cleaners, and some brake and component cleaners.

Like 1,1,1-trichloroethane, acetone's desirable properties include:

* Excellent solvent properties.
* Rapid evaporation.
* No residual oil film.

But, unlike 1,1,1-trichloroethane, ACETONE IS EXTREMELY FLAMMABLE. Acetone must not be used in areas where there are open flames, arching, sparks, or hot surfaces. Adequate precautions for fire and explosion prevention must be made when substituting 138-3436 or 9U-5839 Liquid Gasket for 7M-7260 Liquid Gasket. For any questions about these products, contact the Product Manager at Phone Number (309) 675-6713.

Caterpillar Information System:

1998/02/09 Proper Reading Of LCD Service Meters {7450,7478,7480}
1998/02/09 New Shaft Seals Available For Gear Type Hydraulic Pump Groups To Prevent Leakage {5073}
1998/02/09 Replacements Products Available For 4C-4079 Brake And Component Cleaner {0680}
1998/02/09 8N-4617 Air Cleaner Clamp Kit Available {1051}
1998/02/09 New Fan Drive Group (Variable Speed) Provides Increased Service Life {1359}
1998/02/09 Machines Equipped With Snow Tires Can Prevent Fender Damage {3013}
1998/02/09 VIMS Internal Back-Up Battery Life Expectancy And Replacement Procedure {7601}
1998/02/09 Longer Steering Hose Assembly Eliminates Rubbing {4304}
1998/02/09 Exhaust Bypass Group Changes Provide Improved Reliability, Performance, And Serviceability {1057}
1998/02/09 Additional Brake Studs Are Required To Increase Brake Pressure On Certain Off-Highway Trucks {4061}
1998/02/09 Process Changes Result In Improved 3500 Engine Remanufactured Connecting Rod Assembly {1218}
1998/02/09 New Tie Rods And Spindle Assemblies Improve Service Life {4329,3282}
1998/02/16 Chrome Tension Cylinder Rods Are More Durable And Improve Seal Life {4197}
1998/02/16 24H Motor Grader Windshield Wiper Now Serviced {7305}
1998/02/16 Special Instruction, SEHS9364-02, "Off-Highway Truck Rear Wheel Salvage", Is Now Available {0374,4208}
1998/02/16 Procedure For Engine Pre-Lubrication System Bypass On Certain Off-Highway Trucks {1469}
1998/02/16 Improved Bearings Used In Transmission Planetary Groups On Certain Off-Highway Trucks {3160,3186}
1998/02/16 Cold Cylinder Cutout Strategy Added To The Electronic Control Module (ECM) Software {1902}
1998/02/16 Track Alignment Procedure {4198}
1998/02/16 Air Bleed Procedure For Track Tensioning Ram Equipped With The Field Update Kit {4197}
1998/02/16 Proper Remote Air Bleed Installation Procedure For Machines Equipped With MTS Track Systems {4197}
1998/02/16 Be Sure To Use The Correct Inlet And Exhaust Valves In Engines Equipped With Valve Bridges That Do Not Ride On Dowels {1105,1121}
1998/02/23 New Cover And Insert Reduce Wear Between Leveler And Cover For Steering Pump Group{4306}
1998/02/23 New Relief Valve Pressure Settings For Main Hydraulic System{5069,5117}
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.