1996/08/12 Caterpillar


New Hydraulic Pump Now Used And Service Parts Are Available {5070}

Usage:


D250E (5TN),
D300E (7FN) Articulated Trucks

Description of Change: The main hydraulic pump has been replaced by a new pump to increase service life.

Adaptable To: The 123-2985 Piston Pump Group has been canceled and replaced by 132-7098 Piston Pump Group. The 132-7098 Piston Pump Group is effective with D250E (5TN626) and D300E (7FN347) Articulated Trucks. The 132-7098 Piston Pump Group is serviced with the parts listed in Chart 1. The 123-2985 Piston Pump Group is no longer serviced as a group, the serviced parts are listed in Chart 2.


Illustration of Main Hydraulic Pump

Caterpillar Information System:

1996/08/12 Wheel Bearing Check And Adjustment Maintenance Interval {4208}
1996/08/12 New Bracket For The Engine RPM Control Cable {1265}
1996/08/12 New Steering Flow Switch Assembly Prevents Open Contacts {7492}
1996/08/12 Improved Steering Flow Switch Assembly Prevents Open Contacts {7492}
1996/08/12 Fuel Priming Pump Group Can Be Modified To Provide Better Access To The Pump Assembly {1258}
1996/08/12 S·O·S Valve Locations For The H-Series Motor Graders {7576}
1996/08/12 Improved Machine Monitor (Lightbar) Control Group Used {7402,7451}
1996/07/29 Test Procedures For 3306B Machine Engines With A "Dog Leg" Torque Curve{1000}
1996/07/29 Drain Plate Is Standard On 3508 EUI Engines Used In D11N Track-Type Tractors{1383}
1996/07/29 New Oil Jet Tube Assemblies Replace Oil Cooling Jet Assemblies{1331}
1996/07/29 Improvement Of Uploading Process For VIMS{7601}
1996/07/29 Decals And Reference Charts For Correct Tire Pressures{4203}
1996/08/12 Procedure For Steering Stop Setting {7050}
1996/08/12 New Priority Valve Spool Increases Steering System Flow {4306,4320}
1996/08/12 Longer Battery Cable Improves Service Life of Battery Posts {1402}
1996/08/12 Individual Components Of The Rolling Hoses Are Available as Separate Service Parts {5057}
1996/08/12 Load Capacity Chart Part Numbers Are Now Available For Telehandlers Under ANSI Regulation {6400,7000}
1996/08/12 New Maintenance Schedule Reduces Cost Of Servicing {7500}
1996/08/12 Smaller Diameter O-Ring Seal Used On Head For Threaded Gland Cylinder Groups {4303,5101,5102,5104,5452,7562}
1996/08/12 New Grooved Piston Assemblies Available For Piston Pump Rotating Groups {5070}
1996/08/12 New Basic Exhaust Bypass Group (Wastegate Valve) Used In Exhaust Bypass Group {1057}
1996/08/12 New High Efficiency Secondary Fuel Filter Assembly Improves Injector Life On 3500 Engines With EUI Injectors {1261}
1996/08/12 Be Sure To Use New 129-1939 Grease When Rebuilding Water Pump Groups {1361,0645}
1996/08/12 New Connector Assembly In Water Lines Group {1380}
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.