Glow Plugs
Usage:
Remove Glow Plugs
start by:
a) remove valve covers
NOTE: Valve cover bases have been removed for better illustration.
1. Disconnect clips from fuel lines (1) and wires (2) from glow plugs.
2. Use tool (A) to remove glow plugs from precombustion chambers.
Install Glow Plugs
1. Put glow plug (1) in position in precombustion chamber.
2. Use tool (A) to tighten glow plugs to a torque of 120 ± 24 lb.in. (13.6 ± 2.8 N·m).
3. Connect wires to glow plugs and clips to fuel lines.
4. Install valve cover bases. Tighten the bolts to a torque of 120 ± 24 lb.in. (13.6 ± 2.8 N·m).
end by:
a) install valve covers
Caterpillar Information System:
3406 DIESEL TRUCK ENGINE Fuel Injection Valves
3406 DIESEL TRUCK ENGINE Fuel Injection Valves (Precombustion Chamber)
3406 DIESEL TRUCK ENGINE Rocker Shafts
3406 DIESEL TRUCK ENGINE Rocker Shafts And Push Rods
3406 DIESEL TRUCK ENGINE Valve Covers
3406 DIESEL TRUCK ENGINE Water Pump
3406 DIESEL TRUCK ENGINE Alternator And Bracket
3406 DIESEL TRUCK ENGINE Exhaust Manifold
3406 DIESEL TRUCK ENGINE Oil Filter Base
3406 DIESEL TRUCK ENGINE Engine Oil Cooler
3406 DIESEL TRUCK ENGINE Water Temperature Regulator
3406 DIESEL TRUCK ENGINE Turbocharger (Airesearch TV81)
3406 DIESEL TRUCK ENGINE Precombustion Chambers
3406 DIESEL TRUCK ENGINE Cylinder Head Assembly
3406 DIESEL TRUCK ENGINE Spacer Plate
3406 DIESEL TRUCK ENGINE Valves
3406 DIESEL TRUCK ENGINE Valve Seat Inserts
3406 DIESEL TRUCK ENGINE Fuel Valve Adapters
3406 DIESEL TRUCK ENGINE Bridge Dowels
3406 DIESEL TRUCK ENGINE Valve Guides
3406 DIESEL TRUCK ENGINE Valve Lifters
3406 DIESEL TRUCK ENGINE Oil Pan
3406 DIESEL TRUCK ENGINE Oil Pump
3406 DIESEL TRUCK ENGINE Piston Cooling Tubes