Exhaust Manifold
Usage:
Remove Exhaust Manifold
start by:
a) remove turbocharger
1. Remove nuts (1) and spacers (2) that hold the exhaust manifold to the cylinder head.
2. Remove exhaust manifold (3) and the gaskets.
Install Exhaust Manifold
1. Put the gaskets in position on the cylinder head. Put exhaust manifold (1) in position on the studs.
2. Put 5P3931 Anti-Seize Compound on the studs. Install the spacers and nuts that hold the exhaust manifold. Tighten the nuts in sequence shown to a torque of 38 ± 5 lb.ft (49 ± 7 N·m).
end by:
a) install turbocharger
Caterpillar Information System:
3406 DIESEL TRUCK ENGINE Oil Filter Base
3406 DIESEL TRUCK ENGINE Engine Oil Cooler
3406 DIESEL TRUCK ENGINE Water Temperature Regulator
3406 DIESEL TRUCK ENGINE Turbocharger (Airesearch TV81)
3406 DIESEL TRUCK ENGINE Turbocharger (Airesearch T18)
3406 DIESEL TRUCK ENGINE Turbocharger (Schwitzer F552)
3406 DIESEL TRUCK ENGINE Turbocharger (Airesearch T12)
3406 DIESEL TRUCK ENGINE Turbocharger
3406 DIESEL TRUCK ENGINE Aftercooler Core
3406 DIESEL TRUCK ENGINE Aftercooler Housing
3406 DIESEL TRUCK ENGINE Inlet Manifold
3406 DIESEL TRUCK ENGINE Fuel Injection Pump And Governor Drive
3406 DIESEL TRUCK ENGINE Alternator And Bracket
3406 DIESEL TRUCK ENGINE Water Pump
3406 DIESEL TRUCK ENGINE Valve Covers
3406 DIESEL TRUCK ENGINE Rocker Shafts And Push Rods
3406 DIESEL TRUCK ENGINE Rocker Shafts
3406 DIESEL TRUCK ENGINE Fuel Injection Valves (Precombustion Chamber)
3406 DIESEL TRUCK ENGINE Fuel Injection Valves
3406 DIESEL TRUCK ENGINE Glow Plugs
3406 DIESEL TRUCK ENGINE Precombustion Chambers
3406 DIESEL TRUCK ENGINE Cylinder Head Assembly
3406 DIESEL TRUCK ENGINE Spacer Plate
3406 DIESEL TRUCK ENGINE Valves