Fuel Valve Adapters
Usage:
Remove Fuel Valve Adapters
start by:
a) remove rocker shafts and push rods
1. Use tool (A) to remove fuel valve adapters (1) from the cylinder head.
2. Remove the gasket and O-ring seal from the adapter.
Install Fuel Valve Adapters
1. Install a new O-ring seal (1) on the adapter. Put a small amount of liquid soap on the O-ring seal.
2. Put 5P3931 Anti-Seize Compound on the threads of the adapter. Put gasket (3) on the adapter. Install fuel valve adapter (2). Use tool (A) to tighten the adapter to a torque of 150 ± 10 lb.ft. (205 ± 14 N·m).
end by:
a) install rocker shafts and push rods
Caterpillar Information System:
3406 DIESEL TRUCK ENGINE Valve Seat Inserts
3406 DIESEL TRUCK ENGINE Valves
3406 DIESEL TRUCK ENGINE Spacer Plate
3406 DIESEL TRUCK ENGINE Cylinder Head Assembly
3406 DIESEL TRUCK ENGINE Precombustion Chambers
3406 DIESEL TRUCK ENGINE Glow Plugs
3406 DIESEL TRUCK ENGINE Fuel Injection Valves
3406 DIESEL TRUCK ENGINE Fuel Injection Valves (Precombustion Chamber)
3406 DIESEL TRUCK ENGINE Rocker Shafts
3406 DIESEL TRUCK ENGINE Rocker Shafts And Push Rods
3406 DIESEL TRUCK ENGINE Valve Covers
3406 DIESEL TRUCK ENGINE Water Pump
3406 DIESEL TRUCK ENGINE Bridge Dowels
3406 DIESEL TRUCK ENGINE Valve Guides
3406 DIESEL TRUCK ENGINE Valve Lifters
3406 DIESEL TRUCK ENGINE Oil Pan
3406 DIESEL TRUCK ENGINE Oil Pump
3406 DIESEL TRUCK ENGINE Piston Cooling Tubes
3406 DIESEL TRUCK ENGINE Connecting Rod Bearings
3406 DIESEL TRUCK ENGINE Crankshaft Main Bearings
3406 DIESEL TRUCK ENGINE Pistons
3406 DIESEL TRUCK ENGINE Cylinder Liners
3406 DIESEL TRUCK ENGINE Fan Drive
3406 DIESEL TRUCK ENGINE Fan Drive (Earlier)