Usage:
All Series G Motor Graders
There may be conditions, such as loose soil or rough terrain or rough haul roads, where the standard suspension seat (6W2917) does not provide an acceptable ride to the operator on Series G Motor Graders. Such conditions can create an over-reaction from the suspension members of this seat. This can result in additional bouncing of the seat because the adjustable suspension feature may not have enough range to dampen the bouncing.
In some cases, the static-type seat (6W8897 Basic Seat Group) will provide an acceptable ride in place of the suspension seat. This seat can be installed on any Series G Motor Grader, and has been available as an attachment for some time for the 120G, 130G, and 140G Motor Graders. This seat can be adjusted to three height levels, but four bolts must be removed to change the adjustment.
To replace the suspension seat with the static-type seat, the following parts are needed. The listed parts can be installed as direct replacements for the suspension seat parts.
- 1-6W8897 Seat Gp.
- 1-9V7454 Armrest As. (Left)
- 1-9V7446 Armrest As. (Right)
- 1-9D4252 Bracket (Right)
- 1-9D4253 Bracket (Left)
- 1-7V9512 Seat Belt Gp.
- 1-9D4250 Support As.
- 4-5P2228 Bolt
- 4-5P1076 Washer
- 4-5S7379 Bolt
- 8-5P1075 Washer
- 4-5M3062 Bolt
- 4-334843 Nut
- 4-5P4116 Washer
- 1-9V7454 Armrest As. (Left)