Shorter Wiper Blade Prevents Contact With Windshield Seal{7305}
Usage:
All Series "
G"
Motor Graders Equipped With High Profile Cab
Description of Change: A shorter wiper blade is used in the rear windshield wiper group on all Series "G" Motor Graders equipped with the high profile cab. The new blades are used to prevent contact with the windshield seal during operation. The new wiper blades are 457.2 mm (18") in length.
The former wiper blades, which are 508 mm (20") in length, hit the windshield seal at the ends of the wiper stroke.
Adaptable To: The new 4K1077 Blade Assembly is a direct replacement for the former 5K1028 Blade Assembly in this application. The new blade assembly is adaptable to the Motor Graders shown in the chart that are equipped with a high profile cab.
Caterpillar Information System:
1981/11/23 Lateral Stabilizer Bracket Available As A Replacement Part{7051,7203}
1981/11/23 New Regulator And Field Coil Assemblies Used{1410,1405}
1981/11/23 Use Of Metric Fasteners{7553,0683,1000}
1981/11/23 New 6V4190 Auto Programmer Group And 6V4865 Auto Programmer Connector Used With 6V2100 Multitach{0651}
1981/11/16 New Clutch Disc Used{3155}
1981/11/16 Locating Special Instructions Quickly And Easily Using Microfiche{0374}
1981/11/16 Improved Element Assemblies Used In Jacket Water Heaters{1383}
1981/11/16 Check Bottom Surface Of Cylinder Liner Flange For Erosion And Wear{1216,1201}
1981/11/09 New Clearance Specifications For Oil Pump Rotor Tip{1304,0374}
1981/11/09 Use FT1566 Valve Spring Compressor For Installation And Removal Of Valves{0622,1108}
1981/11/09 New Screws Used In Air And Electric Horn Groups{7303}
1981/11/09 New Clutch Disc Used{3155}
1981/11/30 New Duo-Cone Seals Use Seal Rings Made Of Steel Instead Of Cast Iron{7555}
1981/12/07 Increased Lubrication For Transmission Planetary Gears{3154,3176}
1981/12/07 New Core Assembly Used In Transmission Oil Cooler Group{1375}
1981/12/07 6V4175 Socket Available For Worn Track Bolts{0612,4179}
1981/12/07 New Air Cleaner Group Has Six Clamps For Improved Seal{1051}
1981/12/07 New Inlet Lines Used In Radiator Group{1353,1380}
1981/12/14 New Valve Seat Used In Shift Pressure Valve Group{3152,3167}
1981/12/14 Make Sure Coolant Conditioner Elements Are Changed At Correct Intervals{1350}
1981/12/14 6V4111 Adapters Available To Pull Spoke-Type Sprockets{4164,0623}
1981/12/14 New Flywheel Housing Gasket Used{1201,1157}
1981/12/14 New Oil Level Gauge Used To Prevent Vibration{1300,1318,7450}
1981/12/14 How To Remove The 7L4511 Sleeve Assembly From Aftercoolers{0620,1063}