1981/11/16 Caterpillar


New Clutch Disc Used{3155}

Usage:


768C And 772B Tractors, 769C And 773B Trucks

SUPPLEMENT: 12/21/81

SERVICE MAGAZINE, NOVEMBER 16, 1981, PAGE 8. In the article "New Clutch Disc Used," the second sentence is not correct. It must be changed to read as follows: The new disc has a "spiral X" groove design in the friction material.

--------------- END SUPPLEMENT ---------------

Description of Change: New discs are used in the No. 4 clutch for the planetary group of the transmission on these machines. The new disc has a "spiral X" groove design in the friction material. This new design will improve the performance of the No. 4 clutch in these transmissions. The former clutch discs had radial grooves in the friction material.

Adaptable As: The new 9P4254 Disc is a direct replacement for the former 4S8724 Disc Assembly in this application. The new disc is in effect on 768C and 769C with Transmission Serial Number 1WA01380 and on 772B and 773B with Transmission Serial Number 1ZA00864.

Caterpillar Information System:

1981/11/16 Locating Special Instructions Quickly And Easily Using Microfiche{0374}
1981/11/16 Improved Element Assemblies Used In Jacket Water Heaters{1383}
1981/11/16 Check Bottom Surface Of Cylinder Liner Flange For Erosion And Wear{1216,1201}
1981/11/09 New Clearance Specifications For Oil Pump Rotor Tip{1304,0374}
1981/11/09 Use FT1566 Valve Spring Compressor For Installation And Removal Of Valves{0622,1108}
1981/11/09 New Screws Used In Air And Electric Horn Groups{7303}
1981/11/09 New Clutch Disc Used{3155}
1981/11/09 Part Number For Fuel Injection Pump Group In New Location{1253,1286}
1981/11/09 New Basic Turbocharger Group Prevents Possible Failures Of Compressor Wheel{1052}
1981/11/09 New 6V3010 Puller Group (Cross Bar Type) Is Easier To Use In Many Applications{0621}
1981/11/02 Correct Power Connection Prevents Damage To Diagnostic Service Tools {0651}
1981/11/02 Steel Retainer Clips For Sure Seal Connectors Used In Electrical Harnesses {0683,1408,7553}
1981/11/23 New 6V4190 Auto Programmer Group And 6V4865 Auto Programmer Connector Used With 6V2100 Multitach{0651}
1981/11/23 Use Of Metric Fasteners{7553,0683,1000}
1981/11/23 New Regulator And Field Coil Assemblies Used{1410,1405}
1981/11/23 Lateral Stabilizer Bracket Available As A Replacement Part{7051,7203}
1981/11/23 Shorter Wiper Blade Prevents Contact With Windshield Seal{7305}
1981/11/30 New Duo-Cone Seals Use Seal Rings Made Of Steel Instead Of Cast Iron{7555}
1981/12/07 Increased Lubrication For Transmission Planetary Gears{3154,3176}
1981/12/07 New Core Assembly Used In Transmission Oil Cooler Group{1375}
1981/12/07 6V4175 Socket Available For Worn Track Bolts{0612,4179}
1981/12/07 New Air Cleaner Group Has Six Clamps For Improved Seal{1051}
1981/12/07 New Inlet Lines Used In Radiator Group{1353,1380}
1981/12/14 New Valve Seat Used In Shift Pressure Valve Group{3152,3167}
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.