New Screws Used In Air And Electric Horn Groups{7303}
Usage:
Series G Motor Graders
Description of Change: Screws with a new design are used in the air and electric horn groups used on Series G Motor Graders. The screws are used to hold the horn button retainer to the steering wheel. The new screws are longer and have different threads which are made especially for use in plastics.
It was possible for the former screws to loosen during machine operation. This was the result of thread damage caused during installation of the screws.
Adaptable As: The new 6V5834 Screws are a direct replacement for the former 2R620 Screws. A quantity of three screws are used per machine.
Caterpillar Information System:
1981/11/09 New Clutch Disc Used{3155}
1981/11/09 Part Number For Fuel Injection Pump Group In New Location{1253,1286}
1981/11/09 New Basic Turbocharger Group Prevents Possible Failures Of Compressor Wheel{1052}
1981/11/09 New 6V3010 Puller Group (Cross Bar Type) Is Easier To Use In Many Applications{0621}
1981/11/02 Correct Power Connection Prevents Damage To Diagnostic Service Tools {0651}
1981/11/02 Steel Retainer Clips For Sure Seal Connectors Used In Electrical Harnesses {0683,1408,7553}
1981/11/02 New Exhaust Manifold Used {1059}
1981/11/02 New Front Service Brake Used; New Wheel Bearing Adjustment Procedure {4250,4205,4208}
1981/11/02 More Equipment Available For Reconditioning Track Rollers {4180,0621,0674}
1981/11/02 Caterpillar Service Tools Are Going Metric {0650}
1981/10/26 Fuel Shutoff Solenoid Seals Better {1259,1286}
1981/10/26 New Screw Used To Hold Panel Assembly And Insulation In Cab {7329}
1981/11/09 Use FT1566 Valve Spring Compressor For Installation And Removal Of Valves{0622,1108}
1981/11/09 New Clearance Specifications For Oil Pump Rotor Tip{1304,0374}
1981/11/16 Check Bottom Surface Of Cylinder Liner Flange For Erosion And Wear{1216,1201}
1981/11/16 Improved Element Assemblies Used In Jacket Water Heaters{1383}
1981/11/16 Locating Special Instructions Quickly And Easily Using Microfiche{0374}
1981/11/16 New Clutch Disc Used{3155}
1981/11/23 New 6V4190 Auto Programmer Group And 6V4865 Auto Programmer Connector Used With 6V2100 Multitach{0651}
1981/11/23 Use Of Metric Fasteners{7553,0683,1000}
1981/11/23 New Regulator And Field Coil Assemblies Used{1410,1405}
1981/11/23 Lateral Stabilizer Bracket Available As A Replacement Part{7051,7203}
1981/11/23 Shorter Wiper Blade Prevents Contact With Windshield Seal{7305}
1981/11/30 New Duo-Cone Seals Use Seal Rings Made Of Steel Instead Of Cast Iron{7555}