Usage:
(1) 8J-2635 Spring (outer) for the flow control valve
Length under test force ... 61 mm (2.40 inch)
Test force ... 162 ± 25 N (36 ± 6 lb)
Free length after test ... 69.9 mm (2.751 inch)
Outside diameter ... 30.5 mm (1.20 inch)
(2) 8J-2634 Spring (inner) for the flow control valve
Length under test force ... 62.5 mm (2.46 inch)
Test force ... 115 ± 23 N (26 ± 5 lb)
Free length after test ... 69.9 mm (2.751 inch)
Outside diameter ... 20.6 mm (.81 inch)
(3) 4F-7115 Spring for the relief valve
Length under test force ... 34.1 mm (1.34 inch)
Test force ... 222 to 261 N (50 to 59 lb)
Free length after test ... 42.9 ± 1.6 mm (1.69 ± .06 inch)
Outside diameter ... 11.91 mm (.469 inch)
(4) Pressure relief setting for the steering system ... 17 235 ± 345 kPa (2500 ± 50 psi)
3J-7470 Shim for the relief valve
Shim thickness ... 0.13 mm (.005 inch)
One shim will change relief pressure by approximately ... 280 kPa (40 psi)
3H-2549 Shim for the relief valve
Shim thickness ... 0.25 mm (.010 inch)
One shim will change the relief pressure by approximately ... 550 kPa (80 psi)
(5) 8B-3115 Shim for the cylinder flow balance
Shim thickness ... 0.25 mm (.010 inch)
Two shims will change the steering time (stop to stop) at high idle by approximately ... 0.1 second
NOTE: The addition of 8B-3115 shims will cause a faster right turn (stop to stop) and a slower left turn. When shims are removed it causes a slower right turn and a faster left turn.
(6) 6E-4040 Spring for the valve spool
Length under test force ... 65.5 mm (2.58 inch)
Test force ... 272 ± 14 N (61 ± 3 lb)
Free length after test ... 68.1 mm (2.68 inch)
Outside diameter ... 52.59 mm (2.07 inch)