1997/03/01 Caterpillar


New "E" Rating Of 1350 Horsepower Available For 3412C High Performance Marine Engine{1902}

Usage:

hp

3412C (3JK) Marine Engines

The 3412C electronically controlled High Performance Marine Engine now has an "Ehp" rating of 1350 horsepower. This rating is for non-revenue producing applications. Port and starboard arrangements are available with a standard or side access cylinder block. These arrangements are compatible with current attachments.

3412C engines, in non-revenue producing vessel applications, rated at 1200, 1250, or 1300 horsepower, can be upgraded to 1350 horsepower by installing a new control group (ratings personality module), heat exchanger group, and additional cover assemblies and gaskets. For complete information, refer to Product News, LEXM7086, "3412C Marine High Performance Propulsion Engine Ehp Rating".

The horsepower setting of the production engines shipped from the factory is held to a close tolerance of ± 1 percent. Field reset capability is also controlled to ± 1 percent. The weight of the engine is not increased, resulting in an outstanding power-to-weight ratio of 2.29 kg/kW (3.78 lb/hp).

This new "Ehp" rating further expands the superior performance, fuel economy, and product reliability already established by the 3412C High Performance Marine Engine.

Caterpillar Information System:

1997/03/01 New Terminal-Mounted Resistor Assembly Allows Proper Loading Of Digital Diagnostic Tool Data Line{1417}
1997/03/01 The Components Of The 7C-5001, 100-8227, And 104-6775 Gas Pressure Regulator Groups Are Available For Parts Service{1270}
1997/03/01 Improvements Made To Remanufactured 0R-3008 Fuel Transfer Pump{1256}
1997/03/01 Improved Bushing O-Ring Seal Available For Injection Pump Groups{1251}
1997/03/01 4C-8180 Timing Tool Group Required For Checking And Adjusting Fuel Injection Timing On 3408C And 3412C High Performance Marine Engines{1250}
1997/03/01 Marine Transmission Oil Pressure Sensor Location{3323}
1997/03/01 Product Support Literature Available{0374,1000}
1997/03/01 Caterpillar Part Numbers Are Used For XQ Rental, Generator Set Circuit Breakers{4461}
1997/03/01 Diode Removed From Junction Box Group{1400,1417}
1997/03/01 New O-Ring Seal Used In Hydraulically Actuated Electronic Unit Injector (HEUI) Pump Group{1714}
1997/03/01 New Turbocharger Group And Air Cleaner Mounting Group Provide Improved Reliability{1051,1052}
1997/02/17 New Spark Plug Provides Better Heat Resistance {1555}
1997/03/01 New Gasket Used In Turbocharger Groups{1052,1061}
1997/03/01 New Adapters In Turbocharger Groups Provide Improved Sealing Between The Turbocharger And Exhaust Elbow{1061,1065}
1997/03/01 New Gasket Used In Aftercooler Groups{1063}
1997/03/01 Improved Fan Spider Assembly Available{1356}
1997/03/01 New Electronic Actuator Group Provides Improved Reliability{1050,1250,1900}
1997/03/01 Valve Rotator Inspection{1109}
1997/03/01 New Procedure For Tightening Bolts On Center Cluster Stub Shaft And Camshaft Idler Stub Shafts In Rear Gear Groups{1206,1237}
1997/03/01 Improved Junction Box Group (Inline){7451}
1997/03/01 New Software For Customer Communications Module (CCM){1920,1926}
1997/04/01 New "Fuel System Reuse And Salvage Guides" Reference Manual Available{1250}
1997/04/01 Low Idle Adjustment, Additional "Buffer" Spring Adjustment Screw Used On Marine Governors{1264}
1997/04/01 132-3904 Camshaft Retainer Holds Camshaft In Cylinder Head{1100}
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.