Improvements Made To Remanufactured 0R-3008 Fuel Transfer Pump{1256}
Usage:
3406B And 3406C Industrial, Marine, And Generator Set Engines
Several improvements have been made to the Remanufactured 0R-3008 Fuel Transfer Pump available for use on 3406 commercial engines. The improvements include:
-
- * The use of pump "MASTERS" to insure correlation between the test machines at the remanufacturing plant and the original equipment manufacturer. This assures test accuracy and repeatability.
- * The use of an air/electronic gauge to insure proper clearance between the tappet plunger and the tappet body. This helps prevent fuel dilution of the engine crankcase oil.
- * The use of a spring tester to help insure quality of the transfer pump center spring and proper pump discharge pressures.
- * The use of pump "MASTERS" to insure correlation between the test machines at the remanufacturing plant and the original equipment manufacturer. This assures test accuracy and repeatability.
Caterpillar Information System:
1997/03/01 Improved Bushing O-Ring Seal Available For Injection Pump Groups{1251}
1997/03/01 4C-8180 Timing Tool Group Required For Checking And Adjusting Fuel Injection Timing On 3408C And 3412C High Performance Marine Engines{1250}
1997/03/01 Marine Transmission Oil Pressure Sensor Location{3323}
1997/03/01 Product Support Literature Available{0374,1000}
1997/03/01 Caterpillar Part Numbers Are Used For XQ Rental, Generator Set Circuit Breakers{4461}
1997/03/01 Diode Removed From Junction Box Group{1400,1417}
1997/03/01 New O-Ring Seal Used In Hydraulically Actuated Electronic Unit Injector (HEUI) Pump Group{1714}
1997/03/01 New Turbocharger Group And Air Cleaner Mounting Group Provide Improved Reliability{1051,1052}
1997/02/17 New Spark Plug Provides Better Heat Resistance {1555}
1997/02/17 New Relay Modules Replace Relay Assembly In Junction Box Groups {1400,1408}
1997/02/17 Improved Tube Assemblies And Electronic Control Group (Pressure Module) Improves Reliability {1058,1285}
1997/02/17 New Rod Ends Used In Exhaust Bypass Groups {1057,1250}
1997/03/01 The Components Of The 7C-5001, 100-8227, And 104-6775 Gas Pressure Regulator Groups Are Available For Parts Service{1270}
1997/03/01 New Terminal-Mounted Resistor Assembly Allows Proper Loading Of Digital Diagnostic Tool Data Line{1417}
1997/03/01 New "E" Rating Of 1350 Horsepower Available For 3412C High Performance Marine Engine{1902}
1997/03/01 New Gasket Used In Turbocharger Groups{1052,1061}
1997/03/01 New Adapters In Turbocharger Groups Provide Improved Sealing Between The Turbocharger And Exhaust Elbow{1061,1065}
1997/03/01 New Gasket Used In Aftercooler Groups{1063}
1997/03/01 Improved Fan Spider Assembly Available{1356}
1997/03/01 New Electronic Actuator Group Provides Improved Reliability{1050,1250,1900}
1997/03/01 Valve Rotator Inspection{1109}
1997/03/01 New Procedure For Tightening Bolts On Center Cluster Stub Shaft And Camshaft Idler Stub Shafts In Rear Gear Groups{1206,1237}
1997/03/01 Improved Junction Box Group (Inline){7451}
1997/03/01 New Software For Customer Communications Module (CCM){1920,1926}