New Software Is Now Used on 3500E Marine Engines {1920, 7620}
- Engine
- 3512E (S/N: MR21-202; MR41-201; MR81-208)
- 3516E (S/N: MD51-201; MR91-207; MRC1-236; MRN1-203)
Description Of Change: The new software has the following updates:
- J1939 communication and 4-20 mA throttle
- Prevent DEF crystallization and clearing logged fault codes
- DEF Quality Calibration
Adaptable To: The following changes are adaptable to the products within the listed serial numbers, and are effective with all products after the listed serial numbers.
The new and former software is listed in Table 1 and 2.
Note: The engine software and aftertreatment software files must both be updated at the same time. Failure to update both will result in false diagnostic codes.
Show/hide table
Engine Software | |
---|---|
New Part Number | Former Part Number |
Show/hide table
Aftertreatment Software | ||
---|---|---|
Sales Model | New Part Number | Former Part Number |
3512E | ||
3516E |
Caterpillar Information System:
301.5, 301.6, 301.7 CR, 301.8, and 302 CR Mini Hydraulic Excavator Machine System Swing Speed and Overswing on Level Ground - Check
PVT110, PVT115 4V3 and PVT117 4V3 Photovoltaic Modules Inverter - Clean
The Connecting Rod Bolt Has a New Look for All 3600, C280, and G3600 Engines {1218} The Connecting Rod Bolt Has a New Look for All 3600, C280, and G3600 Engines {1218}
PVT110, PVT115 4V3 and PVT117 4V3 Photovoltaic Modules Safety
Reuse And Salvage Has Updated Air Inlet Correction Factors for Dynamometer Testing {1000, 1052, 1087} Reuse And Salvage Has Updated Air Inlet Correction Factors for Dynamometer Testing {1000, 1052, 1087}
Reuse And Salvage Has Updated Air Inlet Correction Factors for Dynamometer Testing {0769, 1052, 1087} Reuse And Salvage Has Updated Air Inlet Correction Factors for Dynamometer Testing {0769, 1052, 1087}
301.5, 301.6, 301.7 CR, 301.8, and 302 CR Mini Hydraulic Excavator Machine System Machine Drift on a Slope - Check
301.5, 301.6, 301.7 CR, 301.8, and 302 CR Mini Hydraulic Excavator Machine System Travel on Level Ground - Test - Optional Test
C18 Generator Sets Generator Lead Connections
PM820, PM822, and PM825 Cold Planer Machine Systems Rotor Drive Planetary - Remove and Install
PVT110, PVT115 4V3 and PVT117 4V3 Photovoltaic Modules Module - Clean
301.5, 301.6, 301.7 CR, 301.8, and 302 CR Mini Hydraulic Excavator Machine System Travel on Level Ground - Test
336, 336 GC and 340 Excavator Systems System Schematic
301.5, 301.6, 301.7 CR, 301.8, and 302 CR Mini Hydraulic Excavator Machine System Swing Speed and Swing Drift on a Slope - Check
301.5, 301.6, 301.7 CR, 301.8, and 302 CR Mini Hydraulic Excavator Machine System Cylinder Drift - Check
307.5, 308, 308.5, 309, and 310 Mini Hydraulic Excavators Window (Front)
A New Alternator Bracket Is Now Used on Certain 374F and 390F Excavator Engines {1405} A New Alternator Bracket Is Now Used on Certain 374F and 390F Excavator Engines {1405}
C9.3B Engines Cylinder Block Cover Group
C7.1 Marine Propulsion Engine Piston Cooling Jets - Remove and Install
336 and 336 GC Excavator Camera
PM820, PM822, and PM825 Cold Planer Machine Systems Rotor Drive Planetary - Disassemble
301.5, 301.6, 301.7 CR, 301.8, and 302 CR Mini Hydraulic Excavator Machine System Cylinder Speed - Check
307.5, 308, 308.5, 309, and 310 Mini Hydraulic Excavators Cab Door
307.5, 308, 308.5, 309, and 310 Mini Hydraulic Excavators Joystick Controls