- Excavator
- 374F (S/N: AT21-160; AP41-243; DPE1-113; EBF1-20083; NFJ1-20052; MFL1-20031; XWL1-1; DNM1-10018)
- 390F (S/N: EXA1-1; EXB1-106; HJD1-20095; PYE1-101; TYE1-223; MGF1-10015; HNG1-260; FEH1-20068; HSM1-306; YHT1-1; GAY1-20035)
- Material Handler
- MH3295 (S/N: PA91-303)
- Mobile Hydraulic Power Unit
- 374F MHPU (S/N: DP41-10002; H251-119)
- 390F MHPU (S/N: B371-10001; H271-90224; EXJ1-1)
- OEM Excavator Based Specialty Solution
- 374F OEM (S/N: FH91-90200; P4L1-90212)
- 390F OEM (S/N: N641-90200; PT71-102; P4J1-90201)
Description Of Change: The new bracket with larger isolation mounts is more robust and provides more vibration dampening for the alternator.
Adaptable To: The following changes are adaptable to the products within the listed serial numbers, and are effective with all products after the listed serial numbers.
Do not operate or work on this product unless you have read and understood the instruction and warnings in the relevant Operation and Maintenance Manuals and relevant service literature. Failure to follow the instructions or heed the warnings could result in injury or death. Proper care is your responsibility. |
Reference: Special Instruction, M0088805, Rework Procedure for New Support Bracket on Certain 374F and 390F Excavators Equipped with C18 EnginesThe parts needed to install the new bracket are listed in Table 1.
Part Number | Part Name | Qty |
---|---|---|
Bolt | 1 | |
Bolt | 1 | |
Hard Washer | 6 | |
Washer | 1 | |
Bolt | 1 | |
Bolt | 4 | |
Bolt | 4 | |
Bolt | 1 | |
Bolt | 4 | |
Mounting | 4 | |
Washer | 8 | |
Hard Washer | 8 | |
Cover | 2 | |
Spacer | 1 | |
Support Bracket | 1 | |
Plate | 2 | |
Nut | 4 | |
Bracket As | 1 |