C9.3B Engines Caterpillar


Cylinder Block Cover Group

Usage:

336 DKS


Illustration 1g06278259


Illustration 2g06278258
Tightening sequence

Table 1
Item  Qty  Part  Specification Description 
131-0353 Stud  Tighten the bolts and the studs in the numerical sequence as shown in Illustration 2 to standard torque.
Again, tighten the bolts and the studs in the numerical sequence as shown in Illustration 2 to standard torque. 
6V-2317 Bolt 
6V-5219 Bolt 
241-0542 Stud 

Caterpillar Information System:

A New Alternator Bracket Is Now Used on Certain 374F and 390F Excavator Engines {1405} A New Alternator Bracket Is Now Used on Certain 374F and 390F Excavator Engines {1405}
307.5, 308, 308.5, 309, and 310 Mini Hydraulic Excavators Window (Front)
301.5, 301.6, 301.7 CR, 301.8, and 302 CR Mini Hydraulic Excavator Machine System Cylinder Drift - Check
301.5, 301.6, 301.7 CR, 301.8, and 302 CR Mini Hydraulic Excavator Machine System Swing Speed and Swing Drift on a Slope - Check
336, 336 GC and 340 Excavator Systems System Schematic
New Software Is Now Used on 3500E Marine Engines {1920, 7620} New Software Is Now Used on 3500E Marine Engines {1920, 7620}
301.5, 301.6, 301.7 CR, 301.8, and 302 CR Mini Hydraulic Excavator Machine System Swing Speed and Overswing on Level Ground - Check
PVT110, PVT115 4V3 and PVT117 4V3 Photovoltaic Modules Inverter - Clean
The Connecting Rod Bolt Has a New Look for All 3600, C280, and G3600 Engines {1218} The Connecting Rod Bolt Has a New Look for All 3600, C280, and G3600 Engines {1218}
PVT110, PVT115 4V3 and PVT117 4V3 Photovoltaic Modules Safety
Reuse And Salvage Has Updated Air Inlet Correction Factors for Dynamometer Testing {1000, 1052, 1087} Reuse And Salvage Has Updated Air Inlet Correction Factors for Dynamometer Testing {1000, 1052, 1087}
Reuse And Salvage Has Updated Air Inlet Correction Factors for Dynamometer Testing {0769, 1052, 1087} Reuse And Salvage Has Updated Air Inlet Correction Factors for Dynamometer Testing {0769, 1052, 1087}
C7.1 Marine Propulsion Engine Piston Cooling Jets - Remove and Install
336 and 336 GC Excavator Camera
PM820, PM822, and PM825 Cold Planer Machine Systems Rotor Drive Planetary - Disassemble
301.5, 301.6, 301.7 CR, 301.8, and 302 CR Mini Hydraulic Excavator Machine System Cylinder Speed - Check
307.5, 308, 308.5, 309, and 310 Mini Hydraulic Excavators Cab Door
307.5, 308, 308.5, 309, and 310 Mini Hydraulic Excavators Joystick Controls
307.5, 308, 308.5, 309, and 310 Mini Hydraulic Excavators Work Tool Control
New Software Is Now Used on Certain 3512E Well Service Engines {1920} New Software Is Now Used on Certain 3512E Well Service Engines {1920}
307.5, 308, 308.5, 309, and 310 Mini Hydraulic Excavators Joystick Controls Alternate Patterns
C9.3B Engines for Caterpillar Built Machines Diesel Exhaust Fluid Module - Assemble
307.5, 308, 308.5, 309, and 310 Mini Hydraulic Excavators Engine Starting
C27 and C32 Engine for MD6250 and MD6310 Drill Intake Manifold Air Pressure Is Low
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.