Engine Oil Cooler - Remove and Install
- Refer to Operation and Maintenance Manual, "Coolant (NGEC) - Change" for the correct draining and filling procedures.
Show/hide table
Illustration 1 g06270225 - Remove clamp assembly (1), clips (3), and bolts (4).
- Remove tube (2).
Show/hide table
Illustration 2 g06270395 - Remove bolts (5), clips (7), and clips (8).
- Remove tube (6).
Show/hide table
Illustration 3 g06270404 - Remove bolts (10) and brackets (9).
- Attach a suitable lifting device to the engine oil cooler assembly. The weight of the engine oil cooler assembly is approximately
90 kg (200 lb) .Show/hide tableIllustration 4 g06270410 - Disconnect sensor (13). Remove bolts (12) and bolts (11).
Show/hide table
Illustration 5 g06270420 - Remove bolts (15) and relocate tube assembly (14).
Show/hide table
Illustration 6 g06270422 - Remove four bolts (17), four bolts (16), and engine oil cooler assembly (18).
- Install engine oil cooler assembly (18) in the reverse order of removal.
Caterpillar Information System:
C9.3B Aftertreatment Systems SCR Inducement Emergency Override
C9.3B Aftertreatment Systems SCR Catalyst Sulfation Is Excessive
C7.1 Industrial Engine Engine Air Cleaner Element - Replace
C7.1 Marine Propulsion Engine Front Cover - Remove and Install
C7.1 Marine Propulsion Engine Engine Oil Pan Plate - Remove and Install
C7.1 Marine Propulsion Engine Engine Oil Pump - Remove and Install
320D2 Excavator Machine Systems Final Drive - Assemble
C7.1 Marine Propulsion Engine Engine Oil Pan - Remove and Install
320D2 Excavator Machine Systems Final Drive - Disassemble
C7.1 Marine Propulsion Engine Engine Oil Cooler - Remove and Install
320D2 Excavator Machine Systems Swing Drive - Assemble
301.5, 301.6, 301.7 CR, 301.8 and 302 CR Mini Hydraulic Excavators Track Adjustment - Inspect
M0090131 Battery Analyzer 480-4181 (484-4859 Group) {0374, 0599, 0709, 1401, 7468} M0090131 Battery Analyzer 480-4181 (484-4859 Group) {0374, 0599, 0709, 1401, 7468}
C7.1 Marine Propulsion Engine Gear Group (Front) - Remove and Install
336 Excavators (Powered by C9.3 Tier 4 Engine) Engine Supplement Water Pump - Remove and Install
C9.3B Engine Intake Manifold Air Temperature Is Low
C9.3B Engine Fuel Temperature Is High
C18 Generator Sets Parallel Operation
G3512H and G3516H Generator Set Engines Engine Oil Cooler - Disassemble
C18 Generator Sets Generator Start-up Checklist
G3512H and G3516H Generator Set Engines Engine Oil Cooler - Assemble
New Engine Operation Practice is Now Available to Prevent a Shutdown from a 102-0 Code {1000, 1021, 7432} New Engine Operation Practice is Now Available to Prevent a Shutdown from a 102-0 Code {1000, 1021, 7432}
G3500H Generator Set Engine Air Inlet and Exhaust System
C4.4 Industrial Engine Selective Catalytic Reduction Warning System