Front Cover - Remove and Install
Reference: Special Instruction, "Visual Service Procedures - Colors and Symbols" M0066576.
Start By:
- Remove the crankshaft front seal.
- Remove the belt tensioner.
Show/hide table
NOTICE |
---|
Keep all parts clean from contaminants. Contaminants may cause rapid wear and shortened component life. |
Show/hide table
Illustration 1 | g06269920 |
Show/hide table
Illustration 2 | g06269922 |
Show/hide table
Required Tools | |||
Tool | Part Number | Part Description | Qty |
A | - | Guide Stud M8 by 70 mm |
2 |
B | 367-3535 | Front Cover Alignment Tool | 1 |
Show/hide table
NOTICE |
---|
Keep all parts clean from contaminants. Contaminants may cause rapid wear and shortened component life. |
Show/hide table
Illustration 3 | g06269925 |
Show/hide table
Illustration 4 | g06269927 |
Show/hide table
Illustration 5 | g06269929 |
Show/hide table
Illustration 6 | g06269932 |
Show/hide table
Illustration 7 | g06269935 |
End By:
- Install the crankshaft front seal.
- Install the belt tensioner.
Caterpillar Information System:
C7.1 Marine Propulsion Engine Engine Oil Pan Plate - Remove and Install
C7.1 Marine Propulsion Engine Engine Oil Pump - Remove and Install
320D2 Excavator Machine Systems Final Drive - Assemble
C7.1 Marine Propulsion Engine Engine Oil Pan - Remove and Install
320D2 Excavator Machine Systems Final Drive - Disassemble
C7.1 Marine Propulsion Engine Engine Oil Cooler - Remove and Install
320D2 Excavator Machine Systems Swing Drive - Assemble
301.5, 301.6, 301.7 CR, 301.8 and 302 CR Mini Hydraulic Excavators Track Adjustment - Inspect
C7.1 Marine Propulsion Engine Belt Tensioner - Remove and Install
320D2 Excavator Machine Systems Swing Drive - Disassemble
New Software Is Now Used on Certain G3516H and G3520H Engines {1920} New Software Is Now Used on Certain G3516H and G3520H Engines {1920}
Installation Instruction on Aluminum Oil Pan Baffle Isolators Certain C175 Locomotive Engines {1302} Installation Instruction on Aluminum Oil Pan Baffle Isolators Certain C175 Locomotive Engines {1302}
C7.1 Industrial Engine Engine Air Cleaner Element - Replace
C9.3B Aftertreatment Systems SCR Catalyst Sulfation Is Excessive
C9.3B Aftertreatment Systems SCR Inducement Emergency Override
G3512H and G3516H Generator Set Engines Engine Oil Cooler - Remove and Install
M0090131 Battery Analyzer 480-4181 (484-4859 Group) {0374, 0599, 0709, 1401, 7468} M0090131 Battery Analyzer 480-4181 (484-4859 Group) {0374, 0599, 0709, 1401, 7468}
C7.1 Marine Propulsion Engine Gear Group (Front) - Remove and Install
336 Excavators (Powered by C9.3 Tier 4 Engine) Engine Supplement Water Pump - Remove and Install
C9.3B Engine Intake Manifold Air Temperature Is Low
C9.3B Engine Fuel Temperature Is High
C18 Generator Sets Parallel Operation
G3512H and G3516H Generator Set Engines Engine Oil Cooler - Disassemble
C18 Generator Sets Generator Start-up Checklist