Removal Procedure
Reference: Special Instruction, "Visual Service Procedures - Colors and Symbols" M0066576.
Show/hide table
|
NOTICE |
Care must be taken to ensure that fluids are contained during performance of inspection, maintenance, testing, adjusting, and repair of the product. Be prepared to collect the fluid with suitable containers before opening any compartment or disassembling any component containing fluids.
Refer to Special Publication, NENG2500, "Dealer Service Tool Catalog" for tools and supplies suitable to collect and contain fluids on Cat® products.
Dispose of all fluids according to local regulations and mandates. |
|
Show/hide table
|
NOTICE |
Keep all parts clean from contaminants.
Contaminants may cause rapid wear and shortened component life. |
|
- Drain the engine oil. Refer to the Operation and Maintenance Manual, "Engine Oil and Filter - Change" for the correct procedure.
Show/hide table
|
|
|
Illustration 1 | g06266263 |
Show/hide table
|
|
|
Illustration 2 | g06269579 |
Show/hide table
|
|
|
Illustration 3 | g06269580 |
Show/hide table
|
|
|
Illustration 4 | g06269581 |
Show/hide table
|
|
|
Illustration 5 | g06269582 |
Note: Identify the position and orientation of the tube assembly.
Show/hide table
|
|
|
Illustration 6 | g06269583 |
Show/hide table
|
|
|
Illustration 7 | g06269584 |
Installation Procedure
Show/hide table
Table 1
Required Tools |
Tool |
Part Number |
Part Description |
Qty |
A |
- |
Guide Studs M8 by 100 mm |
4 |
Show/hide table
|
NOTICE |
Keep all parts clean from contaminants.
Contaminants may cause rapid wear and shortened component life. |
|
Show/hide table
|
|
|
Illustration 8 | g06269585 |
Show/hide table
|
|
|
Illustration 9 | g06269586 |
Show/hide table
|
|
|
Illustration 10 | g06269587 |
Note: The isolators are held captive by the gasket.
Show/hide table
|
|
|
Illustration 11 | g06269588 |
Show/hide table
|
|
|
Illustration 12 | g06269589 |
Tightening sequence for the bolts.
|
Show/hide table
|
|
|
Illustration 13 | g06269590 |
Show/hide table
|
|
|
Illustration 14 | g06269591 |
Show/hide table
|
|
|
Illustration 15 | g06269592 |
Show/hide table
|
|
|
Illustration 16 | g06269593 |
Show/hide table
|
|
|
Illustration 17 | g06269594 |
Show/hide table
|
|
|
Illustration 18 | g06269595 |
Show/hide table
|
|
|
Illustration 19 | g06271075 |
Fill the engine oil pan to the correct level. Refer to Operation and Maintenance Manual, "Oil Filter Change" for the correct procedure.
|