Crankshaft
Show/hide table
| |
| Illustration 1 | g06159795 |
Show/hide table
| Specification for 446-8957 Crankshaft Gp | |||
|---|---|---|---|
| Item | Qty | Part | Specification Description |
| 1 | 2 | 363-0559 Thrust Washer | Standard thickness of thrust washer is |
| - | - | - | End play for the new crankshaft is |
Caterpillar Information System:
G3516 Petroleum Engines Rocker Shaft and Push Rod - Remove
CX38-P892 Well Servicing Transmission Engine Does Not Crank
CX38-P892 Well Servicing Transmission Event Code List
CX38-P892 Well Servicing Transmission Diagnostic Capabilities
CX38-P892 Well Servicing Transmission Connector Locations
CX38-P892 Well Servicing Transmission Service Tools
CX38-P892 Well Servicing Transmission General Information
CX38-P892 Well Servicing Transmission System Schematic
CX38-P892 Well Servicing Transmission Transmission - Calibrate
CX38-P892 Well Servicing Transmission Speed Sensor - Adjust
CX38-P892 Well Servicing Transmission Electronic Control Unit - Replace
CX38-P892 Well Servicing Transmission Electronic Control Unit - Configure
C175-16 Marine Engines Engine Governing - Adjust
G3516 Petroleum Engines Rocker Shaft and Push Rod - Install
New Heat Shields Are Now Used on Certain 3512 Locomotive Engines {1067, 7274} New Heat Shields Are Now Used on Certain 3512 Locomotive Engines {1067, 7274}
3500 and 3500B High Displacement Engines for Caterpillar Built Machines Aftercooler - Remove and Install - Aftercooler Housing with 24 bolts
3500B Generator Sets Voltage Regulators
3516B Generator Set Engines with Dynamic Gas Blending Electronic Control System Operation
3516B Generator Set Engines with Dynamic Gas Blending Engine Monitoring System
G3516 Petroleum Engines Cylinder Head - Remove
CX38-P892 Well Servicing Transmission Transmission Does Not Automatically Shift Into Neutral
CX38-P892 Well Servicing Transmission Transmission Does Not Automatically Shift Back Into Gear
CX38-P892 Well Servicing Transmission Transmission Does Not Respond to Shift Selector
CX38-P892 Well Servicing Transmission Replaced Relay or Solenoid Does Not Operate