Turbocharger
Show/hide table
| |
| 图 1 | g06144396 |
Show/hide table
| 技术规格 - 380-9126 涡轮增压器总成 | |||
|---|---|---|---|
| 项目 | 数量 | 零件 | 技术规格说明 |
| 1 | 4 | 375-2467 法兰锁紧螺母 | 在装配前，使用 Loctite C5A 铜防咬合剂润滑螺纹和轴承表面。
拧紧至扭矩为 |
| 2 | 1 | 268-2960 卡箍组件 | 拧紧至扭矩为 |
| 3 | 1 | 9N-2038 涡轮卡箍组件 | 按照以下步骤拧紧带夹： 1. 拧紧卡箍至扭矩 2. 将卡箍松开一至两圈。 3. 再将卡箍拧紧至扭矩为 |
Caterpillar Information System:
C15 and C18 Engines for Caterpillar Built Machines Water Lines
C15 and C18 Engines for Caterpillar Built Machines Piston and Rings
C15 and C18 Engines for Caterpillar Built Machines Exhaust Manifold
Marine Engine and Genset Control Panel IIIB DCU Panel Symptoms
Marine Engine and Genset Control Panel IIIB Remote Panel Symptoms
G3500H Generator Set Engine Inlet Air Is Restricted
C175 Tier 4 Final Engines for Off-Highway Trucks Self-Cleaning Oil Filter Operation
A New Engine Oil Pump Is Now Used for Certain C175-16 Marine Engines {1154, 1304} A New Engine Oil Pump Is Now Used for Certain C175-16 Marine Engines {1154, 1304}
Procedure to Convert the Marine Auxiliary Diesel Electric Power (DEP) C280-16 Engine to a Main Propulsion Conversion C280-16 Engine {1051, 1052, 108D, 1152, 1205, 1302, 1307, 1308, 1319, 1326, 1403, 1901, 7490} Procedure to Convert the Marine Auxiliary Diesel Electric Power (DEP) C280-16 Engine to a Main Propulsion Conversion C280-16 Engine {1051, 1052, 108D, 1152, 1205, 1302, 1307, 1308, 1319, 1326, 1403, 1901, 7490}
Installation Procedure for the Pump Electronic Monitoring System for Well Stimulation Pumps {6002, 7490} Installation Procedure for the Pump Electronic Monitoring System for Well Stimulation Pumps {6002, 7490}
New Monitor Software Is Now Available for Certain Cat® Products {7620} New Monitor Software Is Now Available for Certain Cat® Products {7620}
NOx Sensor Location Identification for C3.4B Engines Used on Certain Paving Compactors {108F, 1091} NOx Sensor Location Identification for C3.4B Engines Used on Certain Paving Compactors {108F, 1091}
C15 and C18 Engines for Caterpillar Built Machines Alternator Mounting
C7.1 Engines and Generator Sets ARD Nozzle Heater - Test
G3500H Generator Set Engine Configuration Parameters
3512E and 3516E Marine Engines Turbocharger - Install
C15 and C18 Engines for Caterpillar Built Machines Electronic Control Wiring Group
New Software Is Now Available For EMCP 4.1 and EMCP 4.2 Displays {7620} New Software Is Now Available For EMCP 4.1 and EMCP 4.2 Displays {7620}
Radiator Hose Leaks on Certain C1.5 and C2.2 Engines {1353} Radiator Hose Leaks on Certain C1.5 and C2.2 Engines {1353}
3512E and 3516E Marine Engines Aftercooler - Remove and Install
Marine Selective Catalytic Reduction (SCR) Retrofit Aftertreatment After Stopping Engine
SCR Retrofit Aftertreatment Product Storage
A New Exhaust Temperature Module Is Now Used on Certain 3512 and 3516 Engines {1901, 4490, 7451, 7490} A New Exhaust Temperature Module Is Now Used on Certain 3512 and 3516 Engines {1901, 4490, 7451, 7490}
C8.7 and C12.9 Marine Engines Speed Control - Test