Radiator Hose Leaks on Certain C1.5 and C2.2 Engines {1353}
- Engine
- C1.5 (S/N: C6N757-758,772-1233,1244-1321,1334-1376,1378-1647,1660-1802; G7P14595-14595,14802-14806,14919-14919,15498-15504,15937-15950,16292-16301)
- C2.2 (S/N: G7L23247-23250,23373-23376,23407-23409,23412-23415,24066-24066; C6M5894-5911,5914-5917,5923-5939,6005-6010,6018-6023,6036-6036,6047-6054,6113-6113,6115-6115,6118-6145,6150-6150,6163-6166,6220-6242,6249-6250,6255-6257,6315-6316,6340-6353,6355-6360,6367-6370,6377-6379,6382-6386,6392-6401,6413-6414,6416-6423,6452-6462,6469-6471,6513-6520,6522-6526,6528-6533,6537-6537,6541-6541,6545-6553,6578-6587,6613-6613,6616-6621,6729-6732,6778-6790,6803-6819,6824-6828,6833-6833,6840-6841,6852-6863,6873-6878,6926-6928,6938-6945,6981-6988,6993-6997,7016-7023,7032-7038,7040-7044,7056-7063,7097-7104,7106-7108,7131-7131)
There have been instances of coolant leaks from the 238-0265 Radiator Hose. Insufficient clearance results in the radiator hose rubbing the fan guard leading to leaks.
Check for clearance between the 238-0265 Radiator Hose and the fan guard. If there is not sufficient clearance, inspect the radiator hose for damage.
If the hose is damaged, install a replacement 238-0265 Radiator Hose. A longer 238-0265 Radiator Hose that provides sufficient clearance has been introduced.
If the hose is not damaged, use a suitable tool to fold the edge of the fan guard away from the hose. Ensure that the fan guard does not come into contact with any other components.
Caterpillar Information System:
New Software Is Now Available For EMCP 4.1 and EMCP 4.2 Displays {7620} New Software Is Now Available For EMCP 4.1 and EMCP 4.2 Displays {7620}
C15 and C18 Engines for Caterpillar Built Machines Electronic Control Wiring Group
3512E and 3516E Marine Engines Turbocharger - Install
G3500H Generator Set Engine Configuration Parameters
C7.1 Engines and Generator Sets ARD Nozzle Heater - Test
C15 and C18 Engines for Caterpillar Built Machines Alternator Mounting
C15 and C18 Engines for Caterpillar Built Machines Turbocharger
C15 and C18 Engines for Caterpillar Built Machines Water Lines
C15 and C18 Engines for Caterpillar Built Machines Piston and Rings
C15 and C18 Engines for Caterpillar Built Machines Exhaust Manifold
Marine Engine and Genset Control Panel IIIB DCU Panel Symptoms
Marine Engine and Genset Control Panel IIIB Remote Panel Symptoms
3512E and 3516E Marine Engines Aftercooler - Remove and Install
Marine Selective Catalytic Reduction (SCR) Retrofit Aftertreatment After Stopping Engine
SCR Retrofit Aftertreatment Product Storage
A New Exhaust Temperature Module Is Now Used on Certain 3512 and 3516 Engines {1901, 4490, 7451, 7490} A New Exhaust Temperature Module Is Now Used on Certain 3512 and 3516 Engines {1901, 4490, 7451, 7490}
C8.7 and C12.9 Marine Engines Speed Control - Test
G3500J Petroleum Engines Air Lines
C7.1 Marine Engine Transmission Oil Temperature Sensor - Remove and Install
C7.1 Marine Engine Transmission Oil Pressure Sensor - Remove and Install
A New Form is Required When Returning a CRS Head for all Tier 4 Interim and Final Engines {0374, 108U} A New Form is Required When Returning a CRS Head for all Tier 4 Interim and Final Engines {0374, 108U}
G3500J Petroleum Engines Gas Engine Ignition
G3500J Petroleum Engines Gas Engine Ignition
PM820, PM822, and PM825 Cold Planer Rotor Cutter Bits - Inspect/Replace - Drum with Three-Piece Rotor Bits