Remote Panel Symptoms
The following sections outline common symptoms associated with the remote panel.
Local Panel (DCU) Does Not Appear
Ensure the following if a remote panel is plugged in and the local panel (DCU) does not appear:
- If the remote panel is a new installation and no switch is installed, a crossover cable must be connected. The crossover cable must be connected from the remote panel to the Ethernet adapter of the local panel. This step refers to the optional Ethernet switch.
- When new remote panels are added to an existing installation, the customer must search under "Engine Connections" on the remote panel.
- If the panel used to appear but does not appear after a firmware update, the DCU was flashed before the remote panel. The remote panel must be flashed first.
- If some panels appear on the network for the remote panel but not all the panels, check "Engine Connections" on the remote panel. Ensure that the panels are not set to "Ignore".
Note: Refer to Programming Guide, LEBM0063, "Cat® A&P Controls Programming Guide" for further information.
Caterpillar Information System:
G3500H Generator Set Engine Inlet Air Is Restricted
C175 Tier 4 Final Engines for Off-Highway Trucks Self-Cleaning Oil Filter Operation
A New Engine Oil Pump Is Now Used for Certain C175-16 Marine Engines {1154, 1304} A New Engine Oil Pump Is Now Used for Certain C175-16 Marine Engines {1154, 1304}
Procedure to Convert the Marine Auxiliary Diesel Electric Power (DEP) C280-16 Engine to a Main Propulsion Conversion C280-16 Engine {1051, 1052, 108D, 1152, 1205, 1302, 1307, 1308, 1319, 1326, 1403, 1901, 7490} Procedure to Convert the Marine Auxiliary Diesel Electric Power (DEP) C280-16 Engine to a Main Propulsion Conversion C280-16 Engine {1051, 1052, 108D, 1152, 1205, 1302, 1307, 1308, 1319, 1326, 1403, 1901, 7490}
Installation Procedure for the Pump Electronic Monitoring System for Well Stimulation Pumps {6002, 7490} Installation Procedure for the Pump Electronic Monitoring System for Well Stimulation Pumps {6002, 7490}
New Monitor Software Is Now Available for Certain Cat® Products {7620} New Monitor Software Is Now Available for Certain Cat® Products {7620}
NOx Sensor Location Identification for C3.4B Engines Used on Certain Paving Compactors {108F, 1091} NOx Sensor Location Identification for C3.4B Engines Used on Certain Paving Compactors {108F, 1091}
Marine Engine and Genset Control Panel IIIB Starting and Stopping
SCR Retrofit Aftertreatment Maintenance Interval Schedule
C7.1 Engines and Generator Sets ARD Nozzle - Test
An Improved Differential Housing is Now Used on Certain 777D, 777F, and 777G Off-Highway Trucks {3256, 3258, 3281} An Improved Differential Housing is Now Used on Certain 777D, 777F, and 777G Off-Highway Trucks {3256, 3258, 3281}
SCR Retrofit Aftertreatment Overhaul (Major)
Marine Engine and Genset Control Panel IIIB DCU Panel Symptoms
C15 and C18 Engines for Caterpillar Built Machines Exhaust Manifold
C15 and C18 Engines for Caterpillar Built Machines Piston and Rings
C15 and C18 Engines for Caterpillar Built Machines Water Lines
C15 and C18 Engines for Caterpillar Built Machines Turbocharger
C15 and C18 Engines for Caterpillar Built Machines Alternator Mounting
C7.1 Engines and Generator Sets ARD Nozzle Heater - Test
G3500H Generator Set Engine Configuration Parameters
3512E and 3516E Marine Engines Turbocharger - Install
C15 and C18 Engines for Caterpillar Built Machines Electronic Control Wiring Group
New Software Is Now Available For EMCP 4.1 and EMCP 4.2 Displays {7620} New Software Is Now Available For EMCP 4.1 and EMCP 4.2 Displays {7620}
Radiator Hose Leaks on Certain C1.5 and C2.2 Engines {1353} Radiator Hose Leaks on Certain C1.5 and C2.2 Engines {1353}