A New Engine Oil Pump Is Now Used for Certain C175-16 Marine Engines {1154, 1304}
- Engine
- C175-16 (S/N: M6B1-1010)
Description Of Change: The new engine oil pump has helical cut gear teeth and an improved material for the bearings. There is also a redesigned bracket for the alternator guard.
Adaptable To: The following changes are adaptable to the products within the listed serial numbers, and are effective with all products after the listed serial numbers.
The new 416-9858 Engine Oil Pump Gp replaces the previous 341-2503 Engine Oil Pump Gp.
The new 20R-6900 Engine Oil Pump Gp replaces the previous 20R-0403 Engine Oil Pump Gp.
Show/hide table
Illustration 1 | g06133710 |
The new 326-4289 Bracket replaces the previous 307-8728 Bracket as shown in Illustration 2.
Show/hide table
Illustration 2 | g06149306 |
Caterpillar Information System:
Procedure to Convert the Marine Auxiliary Diesel Electric Power (DEP) C280-16 Engine to a Main Propulsion Conversion C280-16 Engine {1051, 1052, 108D, 1152, 1205, 1302, 1307, 1308, 1319, 1326, 1403, 1901, 7490} Procedure to Convert the Marine Auxiliary Diesel Electric Power (DEP) C280-16 Engine to a Main Propulsion Conversion C280-16 Engine {1051, 1052, 108D, 1152, 1205, 1302, 1307, 1308, 1319, 1326, 1403, 1901, 7490}
Installation Procedure for the Pump Electronic Monitoring System for Well Stimulation Pumps {6002, 7490} Installation Procedure for the Pump Electronic Monitoring System for Well Stimulation Pumps {6002, 7490}
New Monitor Software Is Now Available for Certain Cat® Products {7620} New Monitor Software Is Now Available for Certain Cat® Products {7620}
NOx Sensor Location Identification for C3.4B Engines Used on Certain Paving Compactors {108F, 1091} NOx Sensor Location Identification for C3.4B Engines Used on Certain Paving Compactors {108F, 1091}
Marine Engine and Genset Control Panel IIIB Starting and Stopping
SCR Retrofit Aftertreatment Maintenance Interval Schedule
C7.1 Engines and Generator Sets ARD Nozzle - Test
An Improved Differential Housing is Now Used on Certain 777D, 777F, and 777G Off-Highway Trucks {3256, 3258, 3281} An Improved Differential Housing is Now Used on Certain 777D, 777F, and 777G Off-Highway Trucks {3256, 3258, 3281}
SCR Retrofit Aftertreatment Overhaul (Major)
C7.1 Engines and Generator Sets ARD Ignition - Test
C7.1 Marine Engine Piston Cooling Jets - Remove and Install
The Large Painted on Arrow Used on Turbine Inlet Bellows on Certain C175 Engines Is Temporarily Being Removed {1059} The Large Painted on Arrow Used on Turbine Inlet Bellows on Certain C175 Engines Is Temporarily Being Removed {1059}
C175 Tier 4 Final Engines for Off-Highway Trucks Self-Cleaning Oil Filter Operation
G3500H Generator Set Engine Inlet Air Is Restricted
Marine Engine and Genset Control Panel IIIB Remote Panel Symptoms
Marine Engine and Genset Control Panel IIIB DCU Panel Symptoms
C15 and C18 Engines for Caterpillar Built Machines Exhaust Manifold
C15 and C18 Engines for Caterpillar Built Machines Piston and Rings
C15 and C18 Engines for Caterpillar Built Machines Water Lines
C15 and C18 Engines for Caterpillar Built Machines Turbocharger
C15 and C18 Engines for Caterpillar Built Machines Alternator Mounting
C7.1 Engines and Generator Sets ARD Nozzle Heater - Test
G3500H Generator Set Engine Configuration Parameters
3512E and 3516E Marine Engines Turbocharger - Install