PM620, PM622, PM820 and PM822 and PM825 Cold Planer Machine Systems Caterpillar


Sensor Mounting

Usage:

PM825 3C6


Illustration 1g06118396


Illustration 2g06118397
Detailed view of area A

Table 1
Specification for 376-4136 Sensor Mounting Gp, and 416-2036 Sensor Mounting Gp 
Item  Qty  Part  Specification Description 
2N-6170 Bolt  Torque to 67 ± 13 N·m (49 ± 10 lb ft)
134-9621 Handle  Before assembly, apply green Loctite 620 to the threads between the handles and bolts. 

Caterpillar Information System:

A New Drive Bearing Is Now Used on Certain 3406E, C11, C13, C15, C16, and C18 Engines {1207} A New Drive Bearing Is Now Used on Certain 3406E, C11, C13, C15, C16, and C18 Engines {1207}
PM-620 and PM-622 Cold Planer Engine Supplement Fuel Priming Pump and Primary Filter (Water Separator) - Remove and Install
349F and 352F Excavator Machine System Diagnostic Trouble Codes
G3512 Generator Set Engine Turbocharger - Install
SCR Retrofit Aftertreatment Monitoring System
SCR Retrofit Aftertreatment Product Lifting
SCR Retrofit Aftertreatment Product Description
SR500 Generators Generator Installation
SCR Retrofit Aftertreatment Model View Illustrations
G3612 and G3616 Engines Fuel Shutoff Solenoid - Remove and Install
PM820, PM822, and PM825 Cold Planer Engine Supplement Battery - Remove and Install
SCR Retrofit Aftertreatment General Hazard Information
C13 Engines for Caterpillar Built Machines ECM Software - Install
349F and 352F Excavator Machine System Sensor Signal (PWM) - Test
349F and 352F Excavators Machine System Specifications Stick Cylinder
349F and 352F Excavator Machine System Sensor Supply - Test
349F and 352F Excavator Machine System Solenoid Valve - Test
349F and 352F Excavator Machine System Connector Contact Description
349F and 352F Excavator Machine System System Schematic
PM620, PM622, PM820 and PM822 and PM825 Cold Planer Power Train Speed Sensor and Mounting
349F and 352F Excavators Machine System Main Hydraulic System
349F and 352F Excavators Machine System Electronic Control System
349F and 352F Excavators Machine System Pilot Hydraulic System
349F and 352F Excavators Machine System Main Control Valve
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.