C9.3 Tier 4 Final Engines Caterpillar


Flywheel Housing

Usage:

D6T 2B3


Illustration 1g06054553

Table 1
Specification for 368-6465 Flywheel Housing Gp 
Item  Qty  Part  Specification Description 
During assembly, the front face of the flywheel housing and the rear face of the cylinder block must be free of following substances: Oil, fuel, water, gasket adhesive, assembly compounds, and any other foreign material. Apply ultra blue Loctite 587 to seal the joints between the cylinder block, the flywheel housing, and the oil pan joint. 
5F-0304 Plug  Torque to 35 ± 14 N·m (26 ± 10 lb ft)


Illustration 2g06054552

Table 2
Item  Qty  Part  Specification Description 
165-3931 Bolt  Use the following procedure to tighten the bolts of the flywheel housing:
1. Tighten bolt 1 through bolt 9 to 100 ± 20 N·m (75 ± 15 lb ft) in the numerical sequence as shown in Illustration 1.
2. Tighten bolt 10 through bolt 24 to 40 ± 10 N·m (30 ± 7 lb ft) in the numerical sequence as shown in Illustration 1.
3. Loosen all bolts one full turn.
4. Again, tighten bolt 1 through bolt 24 to 135 ± 20 N·m (100 ± 15 lb ft) in the numerical sequence as shown in Illustration 1. 
165-3929 Bolt 
165-3934 Bolt 
5J-5793 Bolt 

Caterpillar Information System:

C13, C15, and C18 Tier 4 Final Engines Diesel Exhaust Fluid Pump
C13, C15, and C18 Tier 4 Final Engines Diesel Exhaust Fluid Tank - Mounting
3612 and 3616 Engines Piston and Connecting Rods - Remove - Hydraulic Tensioned Rod Bolts
C175 Tier 4 Final Engines for Off-Highway Trucks Intake Manifold Air Temperature Is High
C175 Tier 4 Final Engines for Off-Highway Trucks Engine Shutdown Occurrence
793F and 797F Off-Highway Trucks Power Train Electronic Control System Diagnostic Code List
793F and 797F Off-Highway Trucks Power Train Electronic Control System MID 081 - CID 0248 - FMI 09
C18 Generator Set Engines Diesel Exhaust Fluid Pump - Remove and Install
C175 Tier 4 Final Engines for Off-Highway Trucks Exhaust Differential Temperature Is High
C18 Generator Set Engines Exhaust Gas Valve (NRS) - Assemble
C18 Generator Set Engines Exhaust Gas Valve (NRS) - Disassemble
C18 Generator Set Engines Exhaust Gas Valve (NRS) - Remove and Install
C13, C15, and C18 Tier 4 Final Engines Exhaust Manifold
C9.3 Tier 4 Final Engines Water Pump
C13, C15, and C18 Tier 4 Final Engines Camshaft
C13, C15, and C18 Tier 4 Final Engines Crankshaft
C13, C15, and C18 Tier 4 Final Engines Valve Rocker Arm
C13, C15, and C18 Tier 4 Final Engines Water Lines
C13, C15, and C18 Tier 4 Final Engines Valve Rocker Arm
C13, C15, and C18 Tier 4 Final Engines Valve Mechanism
320 GC, 320 and 323 Excavator Machine Systems Specifications Position Sensor and Mounting
C13, C15, and C18 Tier 4 Final Engines Turbocharger
C13, C15, and C18 Tier 4 Final Engines Valve Mechanism
C7.1 Engines and Generator Sets Engine Monitoring System
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.