C18 Generator Set Engines Caterpillar


Exhaust Gas Valve (NRS) - Disassemble

Usage:

C18 GEN SE RT8

Disassembly Procedure

Start By:

  1. Remove the exhaust gas valve.


    Illustration 1g01845346

  1. Remove temperature sensor (1).

  2. Remove bolts (2). Separate actuator assembly (3) from the valve housing (4).


    Illustration 2g01845473

  3. Remove nut (8), washer (7), and solenoid (6).

  4. Remove spool (5).


    Illustration 3g01896079

  5. Remove O-rings (9) and (10) from spool (5).

Caterpillar Information System:

C18 Generator Set Engines Exhaust Gas Valve (NRS) - Remove and Install
C18 Generator Set Engines Solenoid Valve (Exhaust Balance) - Remove and Install
C18 Generator Set Engines Electronic Unit Injector Sleeve - Remove and Install
C18 Generator Set Engines Fuel Filter Base - Remove and Install
C18 Generator Set Engines Fuel Pressure Regulator - Remove and Install
C175 Tier 4 Final Engines for Off-Highway Trucks Aftertreatment Identification Module - Test
G3512 Generator Set Engine Oil and Filter - Change
793F and 797F Off-Highway Trucks Chassis Electronic Control System Diagnostic Code List
G3512 EPA Emergency and Non-Emergency Standby Generator Sets Engine Oil Level - Check
C18 Generator Set Engines Electric Starting Motor - Remove and Install
G3512 EPA Emergency and Non-Emergency Standby Generator Sets Engine Oil Filter Differential Pressure - Check
C18 Generator Set Engines Alternator - Remove and Install
C18 Generator Set Engines Exhaust Gas Valve (NRS) - Assemble
C175 Tier 4 Final Engines for Off-Highway Trucks Exhaust Differential Temperature Is High
C18 Generator Set Engines Diesel Exhaust Fluid Pump - Remove and Install
793F and 797F Off-Highway Trucks Power Train Electronic Control System MID 081 - CID 0248 - FMI 09
793F and 797F Off-Highway Trucks Power Train Electronic Control System Diagnostic Code List
C175 Tier 4 Final Engines for Off-Highway Trucks Engine Shutdown Occurrence
C175 Tier 4 Final Engines for Off-Highway Trucks Intake Manifold Air Temperature Is High
3612 and 3616 Engines Piston and Connecting Rods - Remove - Hydraulic Tensioned Rod Bolts
C13, C15, and C18 Tier 4 Final Engines Diesel Exhaust Fluid Tank - Mounting
C13, C15, and C18 Tier 4 Final Engines Diesel Exhaust Fluid Pump
C9.3 Tier 4 Final Engines Flywheel Housing
C13, C15, and C18 Tier 4 Final Engines Exhaust Manifold
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.