C13, C15, and C18 Tier 4 Final Engines Caterpillar


Exhaust Manifold

Usage:

826K 232


Illustration 1g06054557
Top view of engine


Illustration 2g03363038
Tightening sequence

Table 1
Specification for 459-9292 Exhaust Manifold Gp 
Item  Qty  Part  Specification Description 
133-3359 Exhaust Manifold  Before assembly, apply thin coat of 2P-2333 High Temperature Sealer to the OD of Male end manifold and ID of female end manifold. Remove excess sealer from the assembled joint. 
12  106-1792 Taperlock Stud  Torque to 35 ± 5 N·m (26 ± 4 lb ft)
12  2N-2766 Locknut  Before assembly, Apply Loctite C5A copper anti-seize to the threads and to the bearing surfaces.
1. Tighten the locknuts in the numerical sequence to 20 ± 3 N·m (177 ± 27 lb in) is shown in Illustration 2 .
2. Again tighten the locknuts in the numerical sequence to 50 ± 5 N·m (37 ± 4 lb ft) is shown in Illustration 2 . 
6V-5843 Bolt  Torque to 25 ± 7 N·m (221 ± 62 lb in)
353-7138 Exhaust Manifold  Before assembly, apply thin coat of 2P-2333 High Temperature Sealer to the OD of Male end manifold and ID of female end manifold. Remove excess sealer from the assembled joint. 
357-0351 Taperlock Stud  Torque to 35 ± 5 N·m (26 ± 4 lb ft)
352-1149 Exhaust Manifold  Before assembly, apply thin coat of 2P-2333 High Temperature Sealer to the OD of Male end manifold and ID of female end manifold. Remove excess sealer from the assembled joint. 
9N-5085 Clamp  Torque to 7.5 ± 1.0 N·m (66.4 ± 8.9 lb in)

Caterpillar Information System:

C9.3 Tier 4 Final Engines Flywheel Housing
C13, C15, and C18 Tier 4 Final Engines Diesel Exhaust Fluid Pump
C13, C15, and C18 Tier 4 Final Engines Diesel Exhaust Fluid Tank - Mounting
3612 and 3616 Engines Piston and Connecting Rods - Remove - Hydraulic Tensioned Rod Bolts
C175 Tier 4 Final Engines for Off-Highway Trucks Intake Manifold Air Temperature Is High
C175 Tier 4 Final Engines for Off-Highway Trucks Engine Shutdown Occurrence
793F and 797F Off-Highway Trucks Power Train Electronic Control System Diagnostic Code List
793F and 797F Off-Highway Trucks Power Train Electronic Control System MID 081 - CID 0248 - FMI 09
C18 Generator Set Engines Diesel Exhaust Fluid Pump - Remove and Install
C175 Tier 4 Final Engines for Off-Highway Trucks Exhaust Differential Temperature Is High
C18 Generator Set Engines Exhaust Gas Valve (NRS) - Assemble
C18 Generator Set Engines Exhaust Gas Valve (NRS) - Disassemble
C9.3 Tier 4 Final Engines Water Pump
C13, C15, and C18 Tier 4 Final Engines Camshaft
C13, C15, and C18 Tier 4 Final Engines Crankshaft
C13, C15, and C18 Tier 4 Final Engines Valve Rocker Arm
C13, C15, and C18 Tier 4 Final Engines Water Lines
C13, C15, and C18 Tier 4 Final Engines Valve Rocker Arm
C13, C15, and C18 Tier 4 Final Engines Valve Mechanism
320 GC, 320 and 323 Excavator Machine Systems Specifications Position Sensor and Mounting
C13, C15, and C18 Tier 4 Final Engines Turbocharger
C13, C15, and C18 Tier 4 Final Engines Valve Mechanism
C7.1 Engines and Generator Sets Engine Monitoring System
G3512 EPA Emergency and Non-Emergency Standby Generator Sets Generator Load - Check
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.