C13, C15, and C18 Tier 4 Final Engines Caterpillar


Turbocharger

Usage:

826K 232


Illustration 1g06054680

Table 1
Specification for 345-8974 Turbocharger Gp 
Item  Qty  Part  Specification Description 
Use the following procedure to tighten the turbine clamp assembly:
1. Torque to 18.1 N·m (160.2 lb in).
2. Loosen to 5.6 N·m (49.6 lb in).
3. Again, torque to 13.6 ± 1.2 N·m (120.4 ± 10.6 lb in)
Torque to 13.6 ± 1.2 N·m (120.4 ± 10.6 lb in)


Illustration 2g06054689

Table 2
Item  Qty  Part  Specification Description 
375-2467 Flange Locknut  Before assembly, apply Loctite C5A copper anti-size to the threads of the locknuts. 
Torque to 70 ± 5 N·m (52 ± 4 lb ft).

Caterpillar Information System:

320 GC, 320 and 323 Excavator Machine Systems Specifications Position Sensor and Mounting
C13, C15, and C18 Tier 4 Final Engines Valve Mechanism
C13, C15, and C18 Tier 4 Final Engines Valve Rocker Arm
C13, C15, and C18 Tier 4 Final Engines Water Lines
C13, C15, and C18 Tier 4 Final Engines Valve Rocker Arm
C13, C15, and C18 Tier 4 Final Engines Crankshaft
C13, C15, and C18 Tier 4 Final Engines Camshaft
C9.3 Tier 4 Final Engines Water Pump
C13, C15, and C18 Tier 4 Final Engines Exhaust Manifold
C9.3 Tier 4 Final Engines Flywheel Housing
C13, C15, and C18 Tier 4 Final Engines Diesel Exhaust Fluid Pump
C13, C15, and C18 Tier 4 Final Engines Diesel Exhaust Fluid Tank - Mounting
C13, C15, and C18 Tier 4 Final Engines Valve Mechanism
C7.1 Engines and Generator Sets Engine Monitoring System
G3512 EPA Emergency and Non-Emergency Standby Generator Sets Generator Load - Check
G3512 EPA Emergency and Non-Emergency Standby Generator Sets Jacket Water Heater - Check
G3512 EPA Emergency and Non-Emergency Standby Generator Sets Nitrogen Oxide Sensor - Replace
C13, C15, and C18 Tier 4 Final Engines Exhaust Cooler (NRS)
G3512 EPA Emergency and Non-Emergency Standby Generator Sets Rotating Rectifier - Check
G3512 Generator Set Spark Plugs - Inspect/Adjust/Replace - Spark Plugs with Adjustable Electrode Gaps
C12.9 Marine Engines Camshaft Gear - Remove and Install
C13, C15, and C18 Tier 4 Final Engines Variable Valve Actuator
C9.3 Tier 4 Final Engines Electric Starting Motor
G3512 EPA Emergency and Non-Emergency Standby Generator Sets Valve Stem Projection - Measure/Record
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.