C13, C15, and C18 Tier 4 Final Engines Caterpillar


Variable Valve Actuator

Usage:

826K 232


图 1g06054785

表 1
技术规格,适用于 329-7052 发动机制动器总成 
项目  数量  零件  技术规格说明 
304-9553 双头螺柱  拧紧至扭矩为 50 ± 5 N·m (37 ± 4 lb ft)
将螺柱进一步转动 45 ± 5 度。 
8T-7062 锥形锁紧螺柱  拧紧至扭矩为 65 ± 10 N·m (48 ± 7 lb ft)。 


图 2g03364107
拧紧顺序

表 2
项目  数量  零件  技术规格说明 
按照图 2 中所示的数字顺序拧紧螺母。 


图 3g06054788
330-1919 发动机制动器总成

表 3
项目  数量  零件  技术规格说明 
230-9425 单向阀总成  拧紧至扭矩为 25 ± 6 N·m (221 ± 53 lb in)。 
230-9447 安全螺母  拧紧至扭矩为 6 ± 1 N·m (53 ± 9 lb in)。 
236-5958 螺栓  拧紧至扭矩为 6 ± 1 N·m (53 ± 9 lb in)。 

Caterpillar Information System:

C12.9 Marine Engines Camshaft Gear - Remove and Install
G3512 Generator Set Spark Plugs - Inspect/Adjust/Replace - Spark Plugs with Adjustable Electrode Gaps
G3512 EPA Emergency and Non-Emergency Standby Generator Sets Rotating Rectifier - Check
C13, C15, and C18 Tier 4 Final Engines Exhaust Cooler (NRS)
G3512 EPA Emergency and Non-Emergency Standby Generator Sets Nitrogen Oxide Sensor - Replace
G3512 EPA Emergency and Non-Emergency Standby Generator Sets Jacket Water Heater - Check
G3512 EPA Emergency and Non-Emergency Standby Generator Sets Generator Load - Check
C7.1 Engines and Generator Sets Engine Monitoring System
C13, C15, and C18 Tier 4 Final Engines Valve Mechanism
C13, C15, and C18 Tier 4 Final Engines Turbocharger
320 GC, 320 and 323 Excavator Machine Systems Specifications Position Sensor and Mounting
C13, C15, and C18 Tier 4 Final Engines Valve Mechanism
C9.3 Tier 4 Final Engines Electric Starting Motor
G3512 EPA Emergency and Non-Emergency Standby Generator Sets Valve Stem Projection - Measure/Record
C9.3 Tier 4 Final Engines Electric Starting Motor
323F SA and 323F LN Excavator and 323F LN MHPU Machine Systems Specifications Stick
G3512 EPA Emergency and Non-Emergency Standby Generator Sets Configuration Parameters
G3512 Generator Set Fluid Recommendations
G3512 EPA Emergency and Non-Emergency Standby Generator Sets Circuit Breakers - Reset
3516C Generator Set Engines Exhaust Elbow - Remove and Install
3512E Engines Vibration Damper - Remove and Install
New Engine Software Is Now Used For Certain G3520 Generator Sets {4490} New Engine Software Is Now Used For Certain G3520 Generator Sets {4490}
Discussion of Aftercooler Maintenance and Replacement Intervals Are Available for Certain Marine Engines Equipped With Sea Water Aftercooling {1063} Discussion of Aftercooler Maintenance and Replacement Intervals Are Available for Certain Marine Engines Equipped With Sea Water Aftercooling {1063}
G3512 Generator Set Engines Solenoid Valve - Test
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.