C9.3 Tier 4 Final Engines Caterpillar


Electric Starting Motor

Usage:

D6T 2B3


Illustration 1g06055212

Table 1
Specification for the 396-4770 Electric Starting Motor Gp 
Item  Qty  Part  Specification Description 
Tighten the battery terminal to 20 to 27 N·m (177 to 238 lb in)
Tighten the ground terminal to 23 to 30 N·m (203 to 265 lb in)
Pull-in current at 20° C (68° F) is 14 Amp. 
Hold-in current at 20° C (68° F) is 46 Amp.

Caterpillar Information System:

G3512 EPA Emergency and Non-Emergency Standby Generator Sets Valve Stem Projection - Measure/Record
C9.3 Tier 4 Final Engines Electric Starting Motor
C13, C15, and C18 Tier 4 Final Engines Variable Valve Actuator
C12.9 Marine Engines Camshaft Gear - Remove and Install
G3512 Generator Set Spark Plugs - Inspect/Adjust/Replace - Spark Plugs with Adjustable Electrode Gaps
G3512 EPA Emergency and Non-Emergency Standby Generator Sets Rotating Rectifier - Check
C13, C15, and C18 Tier 4 Final Engines Exhaust Cooler (NRS)
G3512 EPA Emergency and Non-Emergency Standby Generator Sets Nitrogen Oxide Sensor - Replace
G3512 EPA Emergency and Non-Emergency Standby Generator Sets Jacket Water Heater - Check
G3512 EPA Emergency and Non-Emergency Standby Generator Sets Generator Load - Check
C7.1 Engines and Generator Sets Engine Monitoring System
C13, C15, and C18 Tier 4 Final Engines Valve Mechanism
323F SA and 323F LN Excavator and 323F LN MHPU Machine Systems Specifications Stick
G3512 EPA Emergency and Non-Emergency Standby Generator Sets Configuration Parameters
G3512 Generator Set Fluid Recommendations
G3512 EPA Emergency and Non-Emergency Standby Generator Sets Circuit Breakers - Reset
3516C Generator Set Engines Exhaust Elbow - Remove and Install
3512E Engines Vibration Damper - Remove and Install
New Engine Software Is Now Used For Certain G3520 Generator Sets {4490} New Engine Software Is Now Used For Certain G3520 Generator Sets {4490}
Discussion of Aftercooler Maintenance and Replacement Intervals Are Available for Certain Marine Engines Equipped With Sea Water Aftercooling {1063} Discussion of Aftercooler Maintenance and Replacement Intervals Are Available for Certain Marine Engines Equipped With Sea Water Aftercooling {1063}
G3512 Generator Set Engines Solenoid Valve - Test
3512E Tier 4 Final Engines for Land Electric Drilling Sensor Signal (PWM) - Test
C13, C15, and C18 Tier 4 Final Engines Jacket Water Heater
C13, C15, and C18 Tier 4 Final Engines Fumes Disposal Group
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.