Engine Oil Level Sensor
Show/hide table
Illustration 1 | g03831279 |
Show/hide table
Specification for 430-9455 Liquid Level Sensor Gp | |||
---|---|---|---|
Item | Qty | Part | Specification Description |
1 | 1 | 430-9455 Liquid Level Sensor Gp | Torque to |
A | - | - | Supply voltage. |
B | - | - | Ground. |
C | - | - | Signal voltage. |
- | - | - | With fluid present, signal pulls 0 ± 0.25 V. With no fluid present, open collector. |
- | - | - | In the horizontal position, the switch point is ± |
Caterpillar Information System:
C2.2 Engines For Caterpillar Built Machines Data Link Configuration Status - Test
Procedure to Upgrade EMCP 1, EMCP 2, EMCP 2+, EMCP 3.1, EMCP 3.2, and EMCP 3.3 to EMCP 4.2 {4490, 7451} Procedure to Upgrade EMCP 1, EMCP 2, EMCP 2+, EMCP 3.1, EMCP 3.2, and EMCP 3.3 to EMCP 4.2 {4490, 7451}
C7 and C9 Industrial Engines Diagnostic Trouble Codes
C7 and C9 Industrial Engines Diagnostic Trouble Code Cross Reference
G3304B and G3306B Engines Exhaust Manifold - Install
G3304B and G3306B Engines Exhaust Manifold - Remove
G3304B and G3306B Engines Spark Plug Adapter - Remove and Install
G3304B and G3306B Engines Spark Plugs - Remove and Install
3512B Engine Maintenance Recommendations
C9.3 Marine Engine Exhaust Manifold - Remove and Install - HEX Cooled or Separate Circuit Keel Cooled Hose Connections - Right-Hand Duplex Fuel
C9.3 Marine Auxiliary and Generator Set Engine ECM - Replace
3524B and C175 Engines for Off-Highway Truck/Tractors Crankshaft
C11, C13, C15, and C18 Industrial Engines Cooling Fan Control - Test
C9.3 Marine Auxiliary and Generator Set Engine Sensor Signal (Analog, Passive) - Test
C18 Industrial Engine Fuel Pressure Is Low
Tier 4 Final Engines for Wheel Tractor-Scrapers Data Link - Test
G3612 and G3616 Engines Valve Cover Base - Remove and Install
C11, C13, C15, and C18 Industrial Engines Exhaust Balance Valve - Test
G3612 and G3616 Engines Rocker Arm - Remove
3500E EPA Tier 4 Final and IMO-II/III Switchable Marine Engines Aftertreatment SCR System Dosing - Test
C11, C13, C15, and C18 Industrial Engines NOx Reduction System (NRS) - Test
G3612 and G3616 Engines Rocker Arm - Install
C18 Industrial Engine Sensor Supply - Test
G3612 and G3616 Engines Gas Admission Valve - Remove